KL5LM cold light source mining light
KL5LM series cold light source mining light adopts the lithium battery with safe polymer as power supply，takes high-power LED as light-house,and use exact IC to protect par ts.It has so many virtues,such as miniaturization,  light weight, safety environmental protection, energy saving, high efficiency,avoid maintenance and long life. Preventing over-charging and over-discharging, limiting current and short circuit protection etc. So it is designed for illumination in the environment ofhaving combustible gas mixture, such as coal mine, petroleum, chemical, railway etc.

 

roduct characteristics:

1, The Miner's lamp is portable, made up of cable,Lampholders and battery.The lamp head can    be fixed on mines safety helmets.
2, There is a 230 MA main LED light and several assistant LED  lights in the lamphead. When    rotate the swith clockwise,the main source light, counterclockwise rotate, ass-istant light shine.

3, The battery shell of Miner's lamp is designed with a closed ring, convenient to wear.4, The     lithium miner lamp requires a special charger to recharge to show if the battery is full when    being charging.

4. The lamp is manufactured with electricity,it should charge more than 5 hours the first time,then charge it before using every time.It must be charged with special charger, plug the charger into the socket, the indicator turns green light, then put the DC plug of the charger to the lamp,the indicator turns to be red, it means being charging. It completes chargig until the light turns to green again.

 

No.	Item		Parameter	Unit	Remark
1	Rating voltage		3.7	V
2	Rating capability		5	Ah
3	Lighting duration(main lamp-house)		≥20	H	real duration is more
4	intensity of illumination(main lamp-house)	beginning	≥1500	LX	1 meter from the lamp
		After 11 hours	≥900
5	LED average current	main lamp-house	230	mA
		Secondary lamp-house	110
6	Charge protective voltage		4.20±0.05	V
7	Discharge protective voltage		3.00±0.05	V
8	Battery circular life		≥500	circle	Circular times
9	size		100×45×90	Mm
10	Weight		≤0.55	Kg

1, When the lamp is ready to send,we disconnect the power switch ,and the lead-acid battery is in the state of semi-rechargeable.It means there is about 50 % capacity.

2, During transport ,keep the miner lamp from intense mechanical shock ,shine,rain, and prevent from throwing. roll and pressure.Deformation and damage may affect the using life of miner's lamp.

3, Miner'slamp should be stored in the ambient temperature 0 ~ 40 ℃, dry, clean and well-ventilated, non-corrosive storage, keep away from fire and heat source.

4, There is charging set in the lamphead, and charge-supporting, can be charged conve niently .