~Panel Handler is a special device for handling long and wide materials, such as concrete panel, wood block and so forth. It is modified based on walkie stacker. It could be mounted onto self-propelled floor crane for higher reach.

Panel Handler is fully electric control for clamping panel both in horizontal or vertical position, tilting it by 90 degree, and rotating it left or right by 90 degree for installing the pannel to the wall in vertical situation, or to the ground in it horizontal. Side shift fuction ( 100mm left and right ) is available for option.

Specification:

   Model               :  WS-030/15-BCR

   Load Cap          .:  300kgs

   Lift H                 :  0-1,500mm ( Clamp tilt down in horizontal )

                              300 - 1,800mm ( Clamp tilt up in vertial / rotating point )

   Clamp openning : 450mm - 650mm

   Clamp Length    : 900mm

   *. The openning size and the length of the clamp, and the shape of the clamp are designed to fit with the shape of material being handled.

Special Features :

*. Motorized drive forwards and backwards

*. Electric / Hydraulic lifting and lowering

*. Electric / Hydraulic clamping

*. Electric / Hydraulic tilting up and down by 90 degree

*. Electric / Hydraulic rotating 90 degree left and right

*. Side shift 100mm left and right ( Option )