Product brief introduction
Application Type DDS298-1 single phase DIN rail watt-hour meter is a kind of new style single phase electronic watt-hour meter, it adopts micro-electronics technique, and imported large scale integrate circuit, using advanced technique of digital and SMT techniques etc. The meter completely accords with relevant technical requirements of class land class2 single phase energy meter stipulated in National standard GB/TI7215-2002 and international standard IEC62053-21 (IEC61036). It can accurately and directly measure 50Hz or 60Hz active energy consumption from single phase AC electricity net, it can display total energy consumption by step type impulse register. It has following features: Good reliability, small volume, light weight, specious nice appearance., Convenient installation, etc.
Functions and features
1. It is 35mm standard DIN rail installation, complying with standard DIN EN5002.
2. It is 18mm width, complying with standard DIN43880.
3. May select step motor type impulse register display 99999.9kwh or LCD digital display 99999.9kwh, 999999.9kwh and also 99999.99kwh.
4. Standard configuration: one port of pulse output passive (polarity).
5. Standard configuration: one neutral (N) wire connection, may select two neutral (N) wire connection (N-in, N-out)(as specially required).
6. LCD display can be designed as 9999999kwh (equal to 9999.999kwh), which is suitable for metering when it is small power consumption (as specially required).
7. Standard configuration: short terminal cover, you may select long terminal cover for using safely (as specially required).
Main technical data
TYPE
|
DDS298-1
|
Accuracy Class
|
Class 1
|
Rated Voltage (V)
|
120, 220, 230, 240 (V)
|
Rated Current (A)
|
5(25), 5(30), 5(32) A
|
Starting Current
|
0.4% Ib
|
Insulation performance
|
AC voltage 2KV for one minute, impulse voltage 6kv
|