Co2 fractional laser acne removal:

ITheory: CO2 Laser skin rejuvenation system is with particular designed intelligent laser control system to ensure a precise treatment, Nano Yag laser energy shooting is an even steady and safe treatment process,easy and fast,without down time.
IIApplications: 1. Skin renewing and resurfacing
2. Wrinkle removal, skin tightening
3. Acne and acne scar removal
4. Smooth burnt scars and surgery scars, etc
5. Remove intractable chloasmas and pigmentation
6. Sun damage recovery
IIIFeatures: 1. Particular designed intelligent laser control system ensures a precise treatment.
2. Laser energy shooting is an even steady and safe treatment process.
3. Wide range application, effective treatment.
4. Easy and fast treatment, no down time.
IVBasic specification:Laser mode: Low-valance mode
Wavelength: 10.6μm, far-infrared laser
Pulsed radiofrequency: 0.530 W
Control: Touching switch, microprocessor-controlled
Display: LCD display
LCD :
1. Max power: 120W
2. Pulse width: 0.05-1s
Pulse:
1. Average power: 30W
2. Pulse frequency: 33.3 Hz
Working mode:
Continuous, single pulse, Repeat pulse and super plulse
Scan Graphics: Square, rectangle, round or customized graphics
DOT quantity:  400 dots at most
Working state: Hyper-pulsed mode
Scan mode: Sequence scan or Random scan
Pulse energy: 10mj to 100mj is optional for each DOT.
VTechnical specification:Laser apparatus: Sealed off laser device stimulated by direct current
Condenser focus : f=100mm
Beam divergence angle: 4 mrad
Spot size:0.4mm
Radiation time: 0.01 1 sec
Interval time: 0.01 1 sec
Aiming beam: Less than 2mW, 635nm red semiconductor laser
Cooling system:Closed loop circulating water
Environment temperature: 5-400C
Relative humidity: <80%
Temperature in transit: -40-500C
Beam transport device:Articulated arm with 7-joint and balance weight
Atomospheric pressure:86.0kkpa-106.0kpa
Warning up time:5min
Electromagnetic requirement:No electromagnetic ,Field interference
Power supply:230V/110V