The in-depth PP filter is a multi-leveled comprehensive filter, It is made by the manufacturing technology we developed. It is kind of Melt-Blown three leveled PP impurity filter, produced by three different diameters of nozzles. The product is structured with three different fibers, the inside is thin fiber and the outside is with thick fiber. In order to filtrate liquid impurities and reach the best filter efficiency. It could increase the filter impurity capacity, extend the service life and reduce the consumptive material cost.

Characteristics:
1. Three leveled filter, high impurity capacity and long service life
2. High filter efficiency through Melt-Blown superfine fiber
3. 100% pure PP and High anti- chemical quality

Operation conditions:
1. Maximum operation pressure difference: 60°C 1.8kg/cm2 ; 20°C 3.2kg/cm2
2. S estive pressure difference changes at: 1.5kg/cm2
3. Highest operation temperature: 60°C

Industrial application:
1. Electroplate, etching and development in PCB industry
2. Traditional electroplate liquid filtration
3. Pre-filter for industry aqua pure filter system
4. Low viscosity chemical liquid purify and filtration
5. Engineering and recycling water filtration.

Specification:
1. Nominal rating: normal 0.5, 1, 3, 5, 10, 25, 50, 75, 100 micron
2. Materials of construction: 100% melt-blown thin PP fiber
3. Length: 9.87”, 10”, 20”, 30”, 40”
    (251mm, 254mm, 508mm, 762mm, 1016mm)
4. Core diameter: 28mm
5. Outside diameter: 63mm

Package:

10”  50PCS/CTN, 20”  25PCS/CTN, 30”  25PCS/CTN, 40”  20PCS/CTN.