PP pleated filter cartridge is a kind of advanced deep filter , the nominal rating range is from 0.1 um to 60 um. The filter membrane, its filter precision is not affected by the material loaded pressure and it has the low differential pressure, high flux, excellent filter efficiency and lower cost. It’s new type of filter and deeply accepted by the users, and it’s being substituted for string wound, cardboard etc… unfixed type filters.

Characteristics:
Chemistry compatibility widely, large flux, low differential pressure, long service life, nominal rating range extensively, multiple options, may satisfy the each kind of application. It could be cleaned by ordinary way and using the high-pressured disinfection cabinet and steam for disinfection.

Typical application:
1. Electronic industry: pre-filter for reverse osmosis equipment, and deionized water system. 2. Food industry: beverages, beer and mineral water etc.
3. Chemical industry: organic dissolvent and ink.
4. Medicine industry: medicine, organism, plasma, compressed air and air.
5. Others: electroplate solution, metal cutting solution and magnetic medium etc.

Operation conditions:
1. Maximum operation pressure difference: 95°C 1.4 kg/cm2 ; 60°C 2.8 kg/cm2 ; 20°C 4.9 kg/cm2
2. S estive pressure difference changes at:2.5 kg/cm2
3. Highest operation temperature: 95°C
4. Bacteria extermination conditions:121°C, over 10 times/ 30 min

Product application fields:
1. Pre-filter for membrane filter
2. CD , DVD factory wash tank filter
3. Pre-filter for DI water system.
4. The cooling water system filters (PCW)
5. Beer and beverage factories clear and filters
6. Middle and low viscosity chemical solution filter

Product standard:
1.Nominal rating: Absolute rating 0.1, 0.2，0.45，1，5，10，20 micron
2. Filter material: 100% melt-blown superfine PP fiber
3.Strut material: PP fiber
4. End Caps: Strong PP
5. O-ring material: EPDM, Buan N, Silicone, Viton, Viton encapsulated PFA
6. Filter area: >0.5 m2
7. Size: 5”, 10”, 20”, 30”, 40”
  Connection: plane press, insert and card-in type
8. Core diameter: ψ28mm
9. Outside diameter: ψ70mm