Amax series is for straight work,slight bends and circular bends 1/8" diameter with
AMAX55 and 1/4" diameter with AMAX65.
It is ideal for abrasive materials,gasket,rubber ,pvc materials ,leather etc.
|
|
|
AMAX55 |
Amax55 is excellent thru-harden rule with good hardeness ratio and is suitable for slightly abrasive materials. |
|
|
|
Standard |
Available |
Tolerance |
Thickness (mm) |
0.71(2PT) |
0.45~1.07(1.3pt~3pt) |
±0.01 |
Height (mm) |
23.80(0.937") |
23.32(0.918")~ |
±0.02 |
Hardness (Hrc) |
Body : 42
Edge : 42 |
|
±1(Body) |
Edge Type |
Shaved |
Ground |
|
Bevel Form |
CF |
CFDB,SF,SFDB |
|
Edge hardening method |
None(Thru-harden rule) |
|
Max.angle of Mini.Bend Radius |
90 1.0R |
|
|
Used for : Cardboard,corrugated board,labels,post cards, … |
|
|
|
|
AMAX65 |
Amax65 that can be bent 90 degree is very hard rule and offers the highest stability and performance during difficult cutting operations like abrasive materials. |
|
|
|
Standard |
Available |
Tolerance |
Thickness (mm) |
0.71(2PT) |
0.45~1.07(1.3pt~3pt) |
±0.01 |
Height (mm) |
23.80(0.937") |
23.32(0.918")~ |
±0.02 |
Hardness (Hrc) |
Body : 48
Edge : 48 |
|
±1(Body) |
Edge Type |
Ground |
|
|
Bevel Form |
CF |
CFDB,SF,SFDB |
|
Edge hardening method |
None(Thru-harden rule) |
|
Max.angle of Mini.Bend Radius |
90 1.5R |
|
|
Used for : Gaskets,rubber,polywood,cork,felt,beer mats, … |
|
|
|
|
C. FINE Serise. |
|
FINE30 |
Precision ground rule with superior bendability.Ideal for labels,plastics and materials that have elasticity and whenever extreme sharpness is required. |
|
|
|
Standard |
Available |
Tolerance |
Thickness (mm) |
0.45(1.3PT)/
0.53(1.5PT)0.71(2PT)
|
|
±0.01 |
Height (mm) |
23.80(0.937") |
7.0(0.275")~ |
±0.01 |
Hardness (Hrc) |
Body : 32
Edge : 56 |
Body:34~38
Edge:52~60 |
±1(Body) |
Edge Type |
Ground |
|
Bevel Form |
CF |
CFDB,SF,SFDB |
|
Edge hardening method |
Induction |
Laser |
|
Max.angle of Mini.Bend Radius |
150 0.3R (In case of 2PT , Body Hrc 32) |
|
|
|
|
FINE42(52) |
A very precision ground edge rule. Edge hardened to 56Rc on a excellent bendable body.Ideal for cutting labels, cotated paperboard ,plastics ,gaskets,membrane switchs ,name plates, laminated folding cartons, etc. |
|
|
|
Standard |
Available |
Tolerance |
Thickness (mm) |
0.45(1.3PT)/
0.53(1.5PT)0.71(2PT)
|
|
±0.01 |
Height (mm) |
23.80(0.937") |
7.0(0.275")~ |
±0.01 |
Hardness (Hrc) |
Body : 34
Edge : 56 |
Body:34~38
Edge:52~60 |
±1(Body) |
Edge Type |
Ground |
|
Bevel Form |
CF |
CFDB,SF,SFDB |
|
Edge hardening method |
Induction |
Laser |
|
Max.angle of Mini.Bend Radius |
130 0.3R (In case of 2PT , Body Hrc 34) |
|
|
|
|