l         Each controller regulates 256 lamps in most.

l         Power bracket: 250W,400W,1000W.

l         Rise-lower height: 20m.

l         Safetyload: 80kg.

l         Working life: long lifetime, up to 3000 times.

l         The intelligent remote-control movable lighting fixture is composed of three parts: the lifter, the lamps and the remote control. The control section is composed of the wireless electronic signal emitter(controller), the receiver, the travel switch and the power supply.

l         The lifter is installed fixedly at the ceiling of the building. It is connected with the lamps and lanterns by steel wire. When the lamps need to be mend so long as the remote control sends out the signal the lamps then drop to appropriate height to be carried on the service.

l         The biggest merit of this product is that the upper air service is changed into the ground service, which can save the massive maintenance costs and at the same time serviceman is safe. Moreover it is extremely quick.

l         The entire lamp electro circuit divides into the flare with the eletric circuit and the fluctuation control circuit.The electric is controlled separately. The wired control, the normal HID circuit, is used when we turn on/off the lamps. The lifter system power switch is on when fluctuating and off usually.

l         When the lamps and lanterns lines up to the end to contract with the lifter accuratelly the circuit is put through to light a lamp. There exists no radio spark. If the light has been on for a long time the contract point has non-ignition phenomenon.

l         The chimney is made of high pure aluminum by die-casting and sandblast anodic oxidation processing. Efficiency of the lamps and lanterns is 78.8%.

l         Application Area: This product mainly is suitable for room illumination such as infield hall, hanger, power plant, big workshop, etc.