STDC Series High Pressure Series Motor Controller


Features



• use of opto isolation technology to enable controllers to run a more secure and stable
• Use powerful smart microprocessor
• High-speed low-loss, synchronous rectification PWM modulation
• stringent current limit and torque control
• anti-electromagnetic interference, anti-vibration performance, strong
• with battery protection function: When the battery voltage is low, would be timely warning and make current decay, too low to stop exporting in order to protect the battery
• beauty and the fast cooling of the aluminum casing with a cooling gill
• equipped with over-temperature protection function: When the temperature is too high or too low will automatically current decay to protect the controller and battery
• Brake switch is used to control access to regenerative braking
• 0-5V signal used to control the regenerative braking, braking
• Pedal Protection: When you open the controller, pedal power switch will detect the signal, if there is an effective output of the signal will not be
• Current multiplier: in the overwhelming majority of the motor operating current is much greater than the battery current
• Easy installation: Use a 0-5V or 5-0V or 3-wire potentiometer resistor (100K or less) can work
• Connect the computer serial port can be configured on the controller, the controller configuration program can be run on all versions of WindowsXP/2000 over (only to use our offer dedicated connection lines)



Basic functions



• Extended fault detection and protection. Through the LED blinking code to identify the fault.
• real-time monitoring the battery voltage. Battery voltage is too high or too low will weaken the output and to stop working.
• Built-in current loop and the overcurrent protection.
• controller with temperature measurement and protection.



Specifications



• Operating Frequency: 16.6KHz
• Standby current: less than 1mA
• Standby current: less than 1mA
• Controller supply current: 200mA (12V input voltage) or 2.5W
• Maximum operating voltage range: B +, 18V-180V (based on model)
• analog signal and brake pedal inputs :0-5V
• Reverse Speaker: less than 150mA
• Full power Operating temperature range: 0 ℃ to 50 ℃ (controller case temperature)
• Operating temperature range: -30 ℃ to 90 ℃, 100 ℃ shutdown (controller case temperature)
• 10 Miao promote the work of current :200-800A. (Based on model)
• 1 minutes Operating current :150-800A. (Based on model)
• Continuous operating current :100-320A. (Based on model)









STDC Series High Pressure Series Motor Controller

Model Peak Current (Amp) 1 Fen Zhong Current (Amp) Continuous Current (Amp) Voltage (Volt) Power Generation
STDC07600A 600A 600A 240A 24-72V
STDC07601A 600A 600A 240A 24-72V is the
STDC7800A 800A 800A 320A 24-72V
STDC07801A 800A 800A 320A 24-72V is the
STDC09400A 400A 300A 160A 24-96V
STDC09401A 400A 300A 160A 24-96V is the
STDC12400A 400A 300A 160A 24-120V
STDC12401A 400A 300A 160A 24-120V is the
STDC14200A 200A 150A 100A 24-144V
STDC14201A 200A 150A 100A 24-144V is the
STDC14400A 400A 300A 160A 24-144V
STDC14401A 400A 300A 160A 24-144V is the
1. 120V models: Maximum operating voltage 136V.
2. 144V without power mode: maximum operating voltage of 168V.
3. 144V power mode: maximum operating voltage of 180V.
4. Controller supply voltage is 8V-35V.
5. J1, J2 of the female head provided free of charge