Round-Pillar flap gate technical parameters
1）Structure: 2.0 and 1.0 thick stainless steel shell
2）Appearance size:The diameter of main pillar: 168mm,The diameter of extra pillar: 110mm
                                 The width of main pillar and extra pillar: > flap pole,Height: 1050mm
3）Weight: 70kg
4）The length of flap arm: 500mm~900mm
5）The maximum sustaining ability of flap arm: 30kg
6）The transmission angle of flap arm: 90 degree
7）Flap direction: single way/double way（option）
8）Power Supply : AC220V±10%V/50±50%Hz
9）Driven motor：Brush DC motor 200W/24V（common edition）
                                Brushless DC motor 200W/24V（super edition）
10）Input port: relay signal or 12V level signal or pulse wide ≥100ms 12V pulse signal 。Current ≥10mA
11）Communication port: RS485 standard Communication coverage ≤1200m
11）Passing speed: 40 persons / min（normally-opened mode）. 25~30 persons / min（normally-closed mode）.
13）The open and close time of gate: 1~2 seconds
14）Entering passing time in power: 3 seconds
15）Automatic resetting time after troubling: 10 seconds
16）Operating environment: indoors outdoors
   Temperature: -10℃~50℃ Relative humidity: ≤ 90%, no dense