The medical gas outlet are supplied by our own factory which is located in the suburb of Shanghai, covering an area of about 2000 square meters. We mainly supply medical gas outlet of American standard, British standard and German standard. We can also manufacture to your model or design, including products of French standard, Indian standard, Japanese standard and South African standard.

All the products are manufactured in strict accordance with international standards and can thus match perfectly with standardized pin index for gas outlets and the pin index for gas outlets we supply can also match perfectly with standardized medical gas outlets from other manufacturers.

The British standard medical gas outlets we supply can be used for oxygen, vacuum suction, compressed air, N20, N2, CO2 and AGSS. They can be connected with copper pipelines (usuallyΦ10) which is mostly installed in bedhead unit. They can also be connected with breather pipe through the connector installed in the pendant. We also supply medical gas outlet boxes in match with British standard medical gas outlets if you choose to install medical gas outlet onto the wall.

The German standard medical gas outlets can be used for oxygen, vacuum suction, compressed air and AGSS. They can also be connected with both copper pipeline and connector for breather pipe. Relative pin indexes are also available.

The American standard medical gas outlet can be used for oxygen, vacuum suction, compressed air, N2O, N2, and CO2. Presently we only supply the type that can be connected with copper pipelines. Pin indexes for gas outlets of different gases are available.

The medical gas outlets we supply have been certificated by ISO9001-2000 system and have been widely used in Middle East and south-east Asia

Detailed Information:

British Standard medical gas outlet

• Manufactured in strict accordance with BS EN 737-1 standards.
• The pin index of gas outlets are manufactured according to BS 5682 standards.
• The standard for AGSS is BS 6834.
• The appliance of the medical gas outlet is in accordance with HTM2022 standards.
• Respective outlets and pin index for different gases are available. Different pin index are used for different gases.
• different gases.
• ISO32 color standard is applied in distinguishing different gases.
• Installment board and plastic rings are also available.
• We also supply plastic boxes in match with the outlets if you choose to install the medical gas outlets onto the wall. They can be either installed onto the wall or into the wall.

German Standard medical gas outlet

• German standard medical gas outlet are manufactured according to EN 737-1:1998 standard and DIN 13620-2 standard.
• ISO 32 color standard is applied in distinguishing different colors.
• The sockets in medical gas outlets for different gases are in different shapes so that the supply of gases cannot be confused.
• The medical gas outlet can be fixed either with copper pipelines (outer diameter Φ8) or with connectors for breather pipe.
• Each medical gas outlet has been tested according to EN737-1 standard.
• Each medical gas outlet we supply has passed air tightness test.
• Designed with valve for the convenience of maintenance.

American Standard medical gas outlet
 

• American standard medical gas outlet is manufactured in strict accordance with ISO9710, HTM2033 and C11 standards.
• Outlets styles are available: Ohmeda, Chemetron, Puritan-Bennett and DISS.
• Outlets gas outlet for different gases are different in color and structure so that they are easily distinguished.
• medical gas outlet for the same gas have the same back base.
• The pipeline for gas input can gyrate freely within 360 degrees.
• The insider diameter of copper pipeline is 8mm and the outside diameter is 10mm.
• Each gas outlet we supply has passed gas tightness test.
• Both the designers and the manufacturers have many years of relative experience.