I. Main characteristic:
1. This product is equipped with trailer chassis, convenient for traction and arrives at working site quickly;
2. Equipped with drive device itself (the motor), no need for accessorial drive or power;
3. Recycling the waste and old asphalt mixture at the working site; the season temperature difference has small effect on road maintenance project;
4. The equipment adopts imported HONDA motor, hydraulic drive, easy maintenance, reliable usage;
5. Recycling the waste and old asphalt mixture, protecting environment, reducing the cost;
6. Its capacity is producing 3 ton recycling mixture per hour;
II.Main Usage:
This product is specially designed and manufactured for quickly, economically and conveniently repairing small range pit, bumpy, dilapidation, chap in the asphalt road. It completely solved the difficulty that the pit, bumpy repairing can’t be digging as well as supplying at the same because of the mixture supply, which has bored the road maintenance department. On the other hand, during the recycling, it makes full use of the origin waste and old asphalt mixture and reduces the producing cost, also reduces the environment pollution and the expense of wasted mixture transportation and depositing, increase your economy benefit.
III.Main structure
This product is made up of moving chassis, equipment frame, recycling converter, drive system, asphalt spraying system and electrical control system.
Drive system: including GX620 (20 horsepower) Honda gasoline motor, hydraulic pump, hydraulic control valve, hydraulic motor, hydraulic oil cylinder and hydraulic accessories and so on; supplying drive for recycling converter circumrotating and lift, driving asphalt pump and driving AC generator;
Electrical control system: including control handle and kinds of control relays and so on, realizing every electromagnetic valve conveniently;
Recycling converter aggregate: including recycling converter, converter frame, converter protecting cover, the front door cover of the converter and so on; mainly realizing recycling the asphalt mixture or heating and mixing new aggregate; also realizing converter overturn, the converter outlet lift and down;
Moving chassis and equipment frame:
Providing sustentation of the whole equipment and drafting moving; act as the structure of the whole equipment;
Asphalt spraying system:
Including heat preservation asphalt box, asphalt spraying pump, electric heating spraying pipes and so on; mainly realizing mucosity oil spraying during pit and bumpy repairing and small area asphalt spraying;
IV.Product capability:
The max recycling capacity: 800—1000kg/batch
The weight of recycled asphalt mixture block: <0.5kg
Converter incline angle: 50° (above); 30° (below)
Converter rev: 8—12 r/min
Hydraulic oil box cubage: 200L
Fuel air: Liquefied Petroleum Gas
Fuel consumption: 5 Kg LPG for one ton new mixture
Pressure of fuel air: 0.06 Mp
Heating time for every batch: 15-20 min (the environment temperature is above 25℃, the wind is below 2-3 grade.)
The effective cubage of the asphalt tank: 350 L
The max asphalt spraying cubage: 3t/h
Heat power of asphalt spraying pipe: 1.4 kw
Electric heater power of asphalt tank: 1*4kw
Motor power: 3kw/ 220V
Motor: imported Japan Honda gasoline motor, four strokes OHV, 90° V-double cylinders, horizontal shaft
Output power of the motor: 20hp(14.7kw)/3600rpm
Oil consumption: 230-g/hp. Hour
Figure dimension (L*W*H): 3575*2180*2468(mm)
Net weight of the equipment: 3550kg