This test instrument applies to flash point testing on coating, paints, varnish, paint binders, solvents, petroleum products and chemical product. It is designed and manufactured strictly in accordance with IP ISO test methods. Temperature-programmed, manual ignition, visual flash point, the tester uses thermoelectric cooling refrigeration mode, without external cooling device.

Meets standard: GB/T21792/ISO1516; GB/T21775/ISO1523; GB6753.5; GB9752;         IP170; IP304Parts 1＆2; IP491; IP492; BS2000 Part170; BS 3900Parts A8 andA9; BS 6664Parts 1＆2; EN ISO 13736

1.      Technical Parameters:

a)        Flash Point Range: -30～100℃

b)        Heating Rate: 1.5min＜0.5℃

c)        Testing Accuracy: ±0.5℃

d)        Sample Volume: 50mL

e)        Ignition Method: Gas Ignition

f)          Cooling Method: Built-in refrigeration module (external water sources)

g)        Operate Supply: 220V AC

h)        Power: 500W

i)          Size: 400×220×170mm

j)          Weight: 7kg

2.      Standard Attachment:

3.      Optional attachment：

Silicone tube, Flash point of quasi-standard oil