Description:
H-168 PU Automobile joint sealant is mainly applied for the adhesion of the metal plates and the framework of automobile, and the sealing of the welding joint of the refrigeration compartment; The joint filling of the side window glass of the passenger coach; the adhesion and sealing of the glass curtain wall etc.

Application:
1. The metal plates and the framework of automobile
2. The welding joint of the refrigeration compartment
3. The glass curtain wall
4. The side window glass of the passenger coach

Characteristics:
1. Single components facilitationg  application to prevent the compulsory application once and all after mixed on construction sites ,thus causing no waste 
2. Elastic, Good Initial Adhesion, and Moderate Intensity
3. Good Gap-filling Capacity
4. Short Drawing Wire When the Gluing Stops
5. No Corrosion on Base Material, No Penetration Pollution
6. Room temperature and humilidity curing:without any necessary heating , there is a wide range of construction temperature ,so construction can be carried out at a temperature betweeen 5^oC and 40^oC
7. Good weathering resistence Good Ageing Resistance

Technical Data: 

Storage and shelf life:
9 months

Instruction:
The sealed place must be completely cleaned and dried. If necessary, washing them with solvents such as toluene or acetone.
In order to keep better appear range. The joint of cover outside areas should be masked with tape before sealants apply.
Sealant can be repaired immediately and the masking tape should be removed before the sealant skins.
Previous using experiment is necessary beforehand.

Limitions:
1. Don't use in structure glazing.
2. Don't use in aquarium assembly and sealing.
3. Don't use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins. Etc.
4. Don't use to joints which is hidden in earth or immersed in water for long time.
5. Don't use to complete sealing space, results to lack of hydrosphere can't good solidify.

Packing:
310ml aluminum tube packing     
400ml 600ml flexible packing