CR-200 test bench is our company latest indepentent researched and produced special device to test the performance of high-pressure common rail pump and injector , it can be mounted on the traditional test bench,it adopt the BOSCH common rail pump to provide 0~2000 bar of rail pressure, it can test common rail pump and injectors of BOSCH、SIEMENS、DELPHI、DENSO. This test bench is in advanced techonlogy、performance steady and operation convience.
>>>FUNCTION
test common rail injector
1. Test six common rail injectors at a time.
2. test brands:BOSCH、SIEMENS、DELPHI、DENSO.
1. Test the max. oil quantity of high-pressure common rail injector.
2. Test the cranking oil quantity of high-pressure common rail injector.
3. Test the backflow oil quantity of high-pressure common rail injector.
4. Test the average oil quantity of high-pressure common rail injector.
5. Set the high-pressure common rail injector' injection state and oil quantity measure
8. Test the oil quantity consistency of high pressure common rail injector。
test common rail pump
1. Test brands:BOSCH、SIEMENS、DELPHI、DENSO.
2. Test the sealing of common rail pump.
3. Test the internal pressure of common rail pump.
4. Test the proportional solenoid valve of common rail pump.
5. Test the input pressure of common rail pump.
6. Measure the rail pressure in real timePT 212 PT fuel pump stand is special equipment used to provide test and calibration for CUMMINS PT fuel pump. It is widely used, and has frequency conversion stepless speed regulating, duplex rotor flowmeter, abundant functions, and high measure precision. Fulfill the testing requirement of CUMMINS PT fuel pump.
Fit for: PT(G)、PT(G)VS、PT(G)MVS、PT(G)SVS、PT(G)EFC、PT(G)AFC、PT(G)VS-AFC、PT(H)AFC、PT(R)VS fuel pumps etc.
Functions:
1. Gear pump pressure and vacuum test
2. Idle speed pressure and flow test
3. Throttle shaft leakage quantum test
4. Pressure and flow test in every check point
5. Weight assisted pressure test of PT pump
6. AFC, ASA valve test
7. Shut down valve voltage test
8. EFC voltage and flow test
Technique Parameter:
1. Fuel test demarcation flow 50~320、310~910 Kg/h
2. Fuel test leak flow 20~500 ml./min
3. Air test flow 40~400 ml./min
4. Dimension of stand 890×720×1930 (length×width×height) mm
5. Weight of Stand 580Kg