4E1 to Ethernet converter with one fiber Ethernet

Model:	HM-C200F
Brand:	HUMANITY
Origin:	Made In China
Category:	Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment
Label:	protocol converter , 4E1 to Ethernet , fiber port
Price:	-
Min. Order:	2 pc

Inquire Now

Product Description

EOP 4E1 to 4 ETHERNET converter with one fiber Ethernet realizes Ethernet transmission over 1~4E1. 4 Ethernet ports are available including one fiber port with 100Mbps. This device adopts with international standard protocol (G.7041、G.7042、G.7043、G.8040) at all layers and able to intercommunicate with third party products followed same standard.

Technology Characteristics

E1 interface	E1: 4 E1 channel
	Electric characteristic: comply with ITU-TG.703 standard
	Jitter index: comply with ITU-TG.823 standard
	Connector: DB37. RJ45(120Ω) or BNC(75Ω) optional
Ethernet interface	4 interfaces with VLAN
	Comply with IEEE802.1Q
	Auto adapt 10/100M full/half duplex
	Connector: 3 interface with RJ-45, one interface with fiber ports
	MAC address table capability: 1024
	MAC address table aging time: 5 minutes
	Minimum frame length: 64 bytes
	Maximum frame length: 1916 bytes
Optical interface	Default: dual fiber, single mode, 40km
Management (please state in order）	RS232 interface for hyper terminal network management
Management (please state in order）	SNMP network management optional
Power supply	Voltage: AC220V and DC-48V
Power supply	Power consumption: less than 10W
Environment	Operating temperature: -5℃ ~50℃
	Storage temperature: -40℃～70℃
	Relative humidity: ≤95％, non-condensing