developer&Fixer is suitable for rapid and extended auto processing and manual processing with international and universal packing.

 Features:

1. can be used with various medical films.

wide latitude, better anti-oxidation, effective stability

2. can supply processing effect of low fog, powerful contrast, sharp sensitivity and high resolution ratio

3. can supply the better effect ratio of film through adjusting the temperature of chemicals

4. can supply more convenient processing brings better diagnose effect.

5. made with very clean formula.

 Specifications:

Developer&Fixer 1x20L+1x20L,

Handlings

Storage       
 Concentrated liquid
Concentrated liquid are effective in 2 years, but be sure the package is good sealed and keeping the temperature between 13-18.
 Replenisher and tank solution
The replenisher and tank solution can be used within one week; the sufficient volume of replenisher used in two weeks is equivalent to the developer tank volume, to reduce oxidation further, turn off the transport drive except during processing, and avoid the replenisher tank cover open. 

Safe handling of photochemicals       
 Handle all chemicals carefully, when you mix solutions, wear goggles or a face shield, a protective apron and protective gloves from neoprene or nitrile robber, keep out of reach of children.       
 Follow the mixer manufacturers recommendations to accurately set up the mixing routine, following the compose A, B ,C to dilute. 
 Carefully avoid contaminated between developer and fixer. Carefully observe that the mixing tanks are completely emptied before the new mix is made and there is no liquid left.