wind solar controller

Controller Model: SN400-24
Working mode: Street light controller(L)
Applicable batteries: Valve Regulated Lead-Acid Battery
Controller working mode: PWM
Applicable wind motor power: 400W (12m/S),600W(12m/S)
System voltage: 12V/24V
Applicable solar panel current: 10A
Over charge protection voltage: 14.3V/28.6V
Over discharge protection voltage (lower limit): 10.8V/21.6V
Over discharge recover voltage: 13.2-13.5V/26.4-27V
DC load routes: Single/dual optional (confirm when order)
Each route load maximum current: 10A
Empty load consumption: <= 1%
Charging loop voltage drop: <= 5%
Temperature compensation: Optional feature -5 mv/oC (single) (confirm when order)
Installation structure: Wall hanging Al case, inside light pole
Size: Maximum size: W180, H220, D80
          Installation parameters: see later figures
Working environment: -30 centigrade- +50  centigrade
weight: Controller: 2Kg     Dumper: 1.6Kg
NOTE: 1. Must use dumper from the same package as controller!
      2. When ordering, provide wind motor rate power and other its characteristic information.
      3. Confirm installation bracket direction when ordering.

more please click www.sunningpower.com    www.sn-wind.com
Guangzhou Sunning Wind Power Generator Limited Company,