hesco gabion

The Hesco Concertainer gabion is available in a number of different mesh configurations and finishes to suit a range of applications.

In most cases a unit with a larger diameter mesh is chosen for the facing panel to enable the contractor to achieve the best aesthetic finish.

Below: 2000 m³ stepped wall @ Chapel en le Frith, Derbyshire up to 5m high.
Spec: 3mm with 4.55mm face panel
Zincalu Ultra coated mesh.

Right: Tesco Megastore at Coventry, Warwickshire. Flush faced up to 4m high. Spec: 3mm with 4.55mm face panel Zincalu Ultra coated mesh.
		Left : Thorpe Arnold, Leicestershire. Up to 3.5m high this flush faced wall was built using 3.80/4.30mm PVC coated galvanised mesh to comply with Highways Agency requirements of 120yrs lifespan. The sloping top was created by modification of the gabions on site by the contractor.
Right: Altnagelvin Hospital Helicopter landing pad. This curved gabion wall up to 4.5m high, has two courses lined with "Sedum matting". The gabions are manufactured from a combination of 2.70/3.20mm and 3.80/4.30mm PVC coated weldmesh.
		Left : A 2m high gabion wall retaining the north bound carriage way of the A1 nr. Wittering. Gabions are 3.80/4.30mm PVC coated unit.
Right: Chantier - France, a low height retaining wall built using 3mm Zincalu Hesco concertainer gabions.
			Left: Hesco concertainer retaining wall with a 25mm x 25mm mesh face to enable a 30-40mm aggregate fill to be used.

MSN:lhbbearing@hotmail.com

 skype:fengda365