Used in almost all kinds of industries as it can perform precise measurements on various types of raw materials, components, parts and assembled machinery. A must have device in monitoring all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion, chemical equipment, boilers, oil storage tanks, and even in the industries of petroleum, shipbuilding, power station and machine manufacturing. It can measure any hard materials, including steel, cast iron, aluminum, red copper, brass, zinc, quartz glass, polyethylene, PVC, gray cast iron, nodular cast iron, acrylic, water glass and other materials.

 

 

Quality:

 

 * Standard: CE

 * Approved by European Directives for health and safety

 * Uses Micro-computer LSI circuit and crystal time base for highly accurate measurement & fast measuring time

 * Made with high quality materials

 * Ensures DURABILITY for LONG and TROUBLE-FREE life

 

Special Features:

 

 * Measure ultra thin materials from 1 mm thickness

 * Wide measuring range and high resolution

 * Clear LCD screen gives exact reading results with no guessing errors

 * High power emission and broad receiving sensitivity

 * Easily match probes of different frequencies

 * Easy to measure rough surface (even cast iron) and widely used in almost all kinds of industries

 * Measure thickness of many materials such as Steel, Cast Iron, Aluminum, Red copper, Brass, Zinc, Quartz glass, Polyethylene, PVC, Gray cast iron, Nodular cast iron

 * Can match probes of different frequencies with high power emission and broad band of receiving sensitivity

 * Widely used in almost all types of industries to measure rough surfaces and even cast iron

 * Easy to use and consume small amount of power only

 * Low Battery Indicator with auto & manual switch off

 * Comes complete with

 * FREE 1 bottle of Glycerin

 * Ultrasonic sensor

 * Operating Manual

 * Industry strength carrying Case with contoured rubber compartments

 

Specifications:

 

 * Range: 1 - 200 mm / 0.039 - 7.87 inch (45# steel)

 * Resolution: 0.1 mm / 0.0039 inch

 * Accuracy: ± (0.5%n + 0.1)

 * Sound velocity : 500 - 9000 m/s

 * LCD display : 4 digits, 10 mm LCD

 * Metric / Imperial conversion (mm & inches)

 * Lower limit steel pipes: F15mm x 2.0mm, F20mm x 3.0mm determined by the transducer

 * Operating range : 0 - 50°C (32 - 122°F) , < 80% RH

 * Sensor diameter : 10mm (0.39 inch)

 * Sensor length : 90cm (35.43 inch)

 * Sensor weight : approximately 40g

 * Size : 120 x 62 x 30mm (5.5 x 2.8 x 1.2in)

 * Power supply : 4 x 1.5V AAA battery (not included in the set)

 * Main unit Weight : approx. 204g including probes bu not including batteries)