Cryogenic treatment plant of tool and mold is a machine with multi-purpose for cryogenic treatment for mold、tool、cutter and materials etc.. Through the method of connecting the advanced technology of gas replacement to the normally ways of liquid nitrogen cryogenic processing, gas replacement process is a fast and uniform cooling rate and good repeatability and consistency of cryogenic treatment according to the customers’requirements, managing to reach two-purpose machine, save investment, reduce cost and improve efficiency.

Features: 

1. Flexible setting on all the parameters, up to 8 technologies.

2. Up to 128 sections of each technology, each temperature section set by customers.

3. Cooling rate of special cryogenic mode from 0.3℃/min.~2℃/min.,

cooling rate of normal cryogenic mode from 1℃/min.~10℃/min.

4. Directly connect with microcomputer; through microcomputer, set parameters, display working status, temperature curve and print historical data curve etc..

5. More temperature inspection, to ensure the normally operation of equipment.

6. Industrial processor of high-speed 32-bit make equipment efficient operation, energy-saving, stable and reliable.

7.Automatic adjustment by using multi-section of PID, to achieve constant temperature control and cooling rate control.

8.Connect the technology of high-precision inspection for level of liquid nitrogen to high-precision temperature control, good treatment effect.

9.Various features, easy operation, with the characters of safe, reliable and long service life etc.. Key components are imported ones.

10.Using multi-layer insulation technology for cryogenic treatment plant, good internal insulation effect, low liquid nitrogen consumption and uniform temperature distribution.

11.Dry thoroughly during the processing, no oxidation; No anti-corrosive treatment for workpiece such as post- oiling etc..