Product Description:
LO-FR1603PTSA-xxx is a specially designed ceiling products through.
¨ COB technology and specially designed aluminum heat structure to avoid the attenuation caused by the heat problem.
¨ high brightness output.
¨ energy and green energy products.
¨ Built-in power supply with wiring devices, easy installation.
Performance:
Illuminance (lux VS distance)
1 M 2 M 3 M
Model Color Temperature 1a 1b 2a 2b 3a 3b
Lux 2θ 1/2 Lux 2θ 1/2 Lux 2θ 1/2 Lux/cm Lux/cm Lux/cm
LO-FR1603PTSA-C05 5000K 120 60/170 35 17.5/350 10 5/520
LO-FR1603PTSA-T05 4000K 120 60/170 35 17.5/350 10 5/520
LO-FR1603PTSA-W05 3000K 120 60/170 35 17.5/350 10 5/520
Notes:
• The test data is in the darkroom to complete.
• 2θ1 / 2 is the method used to measure distance.
• 2θ1 / 2 is the use of deviated from the axis of approach to the center of brightness as a benchmark to measure the brightness to half of the light as an effective range.
• illumination intensity is the use of optical sensors and a combination of filters to simulate CIE eye-response curve to measure.
• CCT & light intensity measurement error to allow a value of ± 10%.
Dimensions & Materials:
Subject: PCM
Transparent: PC
Net weight: 175g
Installation diameter: φ120mm
Optical Properties @ Ta25: ℃
Product Type Color temperature range Perspective(Typ.) Flux(Typ.) CRI(Ra)
LO-FR1603PTSA-C05 5000 ± 200K 120° 440lm >70
LO-FR1603PTSA-T05 4000 ± 200K 120° 420lm >70
LO-FR1603PTSA-W05 3000 ± 200K 120° 400lm >60
Notes:
• Luminous flux is the use of integrating sphere test.
• CCT & luminous flux measurement error to allow a value of ± 10%.
Electronic properties of @ Ta = 25 ℃:
Input AC 90V ~ 260V @ 50Hz or 60Hz
Power consumption 6W
standby power consumption less than 0.3W Max
Power source lifetime warranty 1 years
lifetime warranty 1 years
operating temperature range -25 ℃ ~ +65 ℃
Storage temperature range -25 ℃ ~ + 65 ℃
Safety phrases:
1. Does not apply to adjustable, electronic switches and the remote controller.
2. Standby start, the maximum input current is not greater than 60A.
Power advantages:
Function: input undervoltage protection, input over-voltage, MOSFET overload, overheat protection, LED open detection input voltage, output voltage and current.
The current average drive power LED lighting on the working life of AC to DC circuit must be used when the smoothing electrolytic capacitors, LED working life of up to 40,000 hours, while the electrolytic capacitor life span of only a few thousand hours, the life of the system by the power group parts used in the life of electrolytic capacitors to decide, if you do not remove the electrolytic capacitor means, then the LED lighting LED driving power of life and the life on the very match, it is difficult to play a long working life of LED lighting advantage Division I non-electrolytic capacitors to make a LED driver power supply, power supply and LED used to solve the synchronization of life.
(Production of custom-designed, provide the input voltage, output voltage and current and shell shape and other specifications.)
Recorded part of the content or appearance may change. Without prior notice