Standard Programming Functions

-Model Select :six model memory
-Model Type :select airplane or heli programming in one transmitter
-Servo Reversing:on all six channels
-Dual Rate/Exponential :for ailerons, elevator and rudder
-End Point Adjustment :fine-tunes servo throws on all six channels
-Digital Trim :stores trim settings for each model for aileron, elevator, rudder and throttle
-Fail Safe :a safety throttle setting in case of loss of transmitter signal
-Battery Fail Safe :moves the throttle to a preset position when the airborne pack reaches 3.8V
-Stick Mode : choose from Mode 1 through 4
-Range Checking :Power Down reduces transmitter output power for up to one minute, allowing range checking from 50 paces away
-Changeable Throttle Stick : select ratchet for airplanes or smooth for helis
-Adjustable Stick Length : choose the length that suits your flying style

Airplane-Specific Programming Functions

-Wing Mixing -for flaperon, flap trim, V-tail and elevon
-Trainer System - with the transmitter as either the master or student system. Compatible with other -Futaba systems
-Throttle Cut - pre-programmed for safely shutting off the engine
-Programmable Mixing (1 & 2) -two different mixes allow any two channels to be combined

Helicopter-Specific Programming Functions

-5-Point Normal and Idle Up Throttle/Pitch Curves.
-Throttle Hold - for autorotation.
-Revo (Revolution Mixing) -mixes rudder and pitch together
-Gyro Mixing - two gyro gain settings can be programmed and selected during flight
-Swash to Throttle Mixing -corrects slowing of the engine's speed caused by the swashplate
-Swashplate Types -choose from 1S (independent aileron, pitch and elevator servos linked to the swashplate), 3S (120?㠃CPM), or 3E (90?㠃CPM)
-Swash AFR -Adjustable Function Rate, for use with 1S, 3S or 3E swash types