A product profile
GYZ-II type wire rope pressure grease device is independently developed by the technical personnel of our company's patent product (Patent No.: ZL99245145.0), this product adopts special high-pressure grease oiling method, grease principle advanced, grease seal without leakage, the infiltration of oil rope core, a sealing ring with special imported resin material, the wear resistance is 7 times of steel, and has the elasticity of rubber, the special structure of oil to prevent grease injected liquid splash, high-pressure injector machine has the advantages of small volume, flexible movement, convenient refueling, can add lubricating grease for wire rope to corrosion in operation, through a specific device to make fat wire rope inside and in high pressure injection the wire rope surface self curing grease coating, so that the wire rope can be fully lubrication and corrosion protection; the fatigue test shows that, the grease grease than the service life of the steel wire rope 80%, wire rope grease to prevent corrosion and fatigue damage, to prevent the wire rope prematurely scrapped, improve the operating safety, cost saving the purpose of.
GYZ-II type wire rope high pressure injection device of grease can be used for mine hoist and winch use all kinds of steel wire rope (single rope of multi rope friction hoisting pulley, tail rope, rope stabilizing) of grease, can also be used in place of heavy machinery, port, wharf, ropeway, sea oil drilling platform, high-rise elevator factory travelling crane, construction, can also be used for automobile, earthmoving machinery automatic filling yellow dry oil.
Two, technical parameters
Pressure ratio: 50:1 compressed air: 0.5 ~ 0.7MPa
Oil transportation capacity: 1 L / min delivery pressure: 20 ~ 30MPa
Fat injection cycle: about 3 months into the fat: yellow dry oil
Injection method: automatic continuous injection of wire rope running speed: 0.15 ~ 0.3 m/s
The diameter of the corresponding wire rope diameter: 18 mm to 50mm