XINJE AC drives ( inverter)

Model:	VB3/ VD4/VB5
Brand:	XINJE
Origin:	Made In China
Category:	Electronics & Electricity / Electric Control System
Label:	XINJE , INVERTER , AC DRIVE
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

1.VB3 series

VVVF/vector control, good performance, easy type, low noise inverter
Add PI tuning based on stable running, flexible I/O terminals, online parameters setting, fixed length control
Swing frequency control, RS485 control, field bus control supply complete plan for customers.

Specifications:

Type VB3-4_ _ _		0P7	1P5	2P2	3P7
Output	Matched motor (KW)	0.75	1.5	2.2	3.7
	Rated output current (A)	2.5	4.0	6.0	9.6
	Rated voltage (V)	AC380
	Frequency range (Hz)	0~500
	Frequency resolution (Hz)	0.01
	Overload ability	150%Rated Current for 1 minutes，180% Rated Current for 1 second
Input	Rated voltage and frequency	3-phase 380V; 50/60Hz
	AC voltage permit fluctuate range	Voltage: -20% ～ +20% voltage unbalance rate <3%
	Frequency fluctuate Range	Frequency: ±5％
	Power capacity（KVA）	2.1	2.5	3.0	5.9

General specifications:

Main Function	Modulation mod	Space Optimized, voltage vector SVPWM modulation
	Frequency precision	Digital Setting: max frequency×±0. 01%； Analog Setting: max frequency×±0.2%
	Frequency resolution	Digital Setting:0.01Hz； Analog Setting:max frequency×0.1%
	Start frequency	0.40Hz～20.00Hz
	Torque boost	Auto torque boost，manual torque boost 0.1%～30.0%
	V/FFFFF curve	Five modes:constant torque V/F curve, 1 V/F curve mode by user and 3 kinds of torque-derating modes (2nd power, 1.7th power, 1.2nd power)
	Accelerate/Decelerate curve	Two modes:linear Acc/Dec, S curve Acc/Dec；seven kinds of Acc/Dec time (Maximum:6000 minutes) and unit(minute or second) is selectable.
	DC braking	Initial frequency of DC braking:0～15.00Hz Braking time:0～60.0 s Braking current:0～80％
	*Power consumption braking 1**	Power consumption unit inside, can be connected with external braking resistor
	Jog	Range of jog frequency:0.1Hz～50.00Hz, Acc/Dec time of jog operation 0.1～60.0s
	Internal PI	Be able to form close loop control system easily
	Multi-step speed running	Multi-step speed running can be realized by internal PLC or control terminals
	Textile wobble frequency	Adjustable preset frequency and center frequency
	Auto voltage regulation (AVR)	When the power system voltage changes, maintain the constant of output voltage
	Auto energy saving mode	V/F curve is optimized automatically according to the load condition to realize energy saving operation
	Auto current limiting	running current is limited automatically to avoid trip caused by over-current
	*Fix-length control 1**	The frequency inverter will stop when reaching the fixed length
	Communication function	With RS485 port, support Modbus-RTU protocol. Be with master-slave multi-devices linkage function
Running function	Command mode	Operated by three mode: digital panel, control terminal, serial port
	Frequency setting mode	Setting modes can be selected ,including: potentiometer setting mode； & keys setting mode；digital function code setting mode; serial port setting mode；UP/DOWN terminal setting mode；analog voltage setting；analog current setting; pulse setting；combination setting;
	Digital input channel	Forward/Reverse running command;6 channels programmable digital input，can set 35 kinds of function，X6 support 0~20KHz pulse output
	Analog input channel	channel analog input ，4～20mA and 0～10V can be selected
	Analog output channel	1 channel analog output，4～20mA、0～10V can be selected.
	digital output channel	Programmable open-collector output,1 channel; relay output signal ,1 channel
Digital panel	LED Display	indicate parameters: frequency ,output voltage, output current and so on.
	connected device display	Indicate physical quantities, such as output frequency, output current ,output voltage and so on
	key Lock	Lock all the keys
	Parameter Copy	Copy function parameters between two inverters by remote control(developing)
Protect function		Over current protection；over voltage protection；under voltage protection；over heat protection；over load protection
Option parts		extension cable of digital panel; brake resistor

Note: *1 functions are only applied to VB5 series inverters.

2. VD4 series inverter

Product description

Good performance, easy type, low noise inverter
Constant torque, variable torque mode (the power will increase one level in variable torque mode)
Flexible I/O terminals, online parameters setting, RS485 control, field bus control supply complete plan for customers.

Specifications:

VD4-4		011
Output	Matched motor(KW)	11
	Rated output current(A)	25.0
	Rated voltage(V)	AC380
	Frequency range(Hz)	0~500
	Frequency resolution(Hz)	0.01
	Overload ability	150%Rated current for one minute，180%Rated current for one second
Input	Rated voltage/frequency	Three phases 380V,50/60 Hz
	AC voltage permit fluctuate range	Voltage:+20％ voltage unbalance rate<3%
	Frequency fluctuate range	Frequency:±5%
	Power capacity	15

General specifications:

Main Function	Modulation mod	Space Optimized, voltage vector SVPWM modulation
	Frequency precision	Digital Setting: max frequency×±0. 01%； Analog Setting: max frequency×±0.2%
	Frequency resolution	Digital Setting:0.01Hz； Analog Setting:max frequency×0.1%
	Start frequency	0.40Hz～20.00Hz
	Torque boost	Auto torque boost，manual torque boost 0.1%～30.0%
	V/FFFFF curve	Five modes:constant torque V/F curve, 1 V/F curve mode by user and 3 kinds of torque-derating modes (2nd power, 1.7th power, 1.2nd power)
	Accelerate/Decelerate curve	Two modes:linear Acc/Dec, S curve Acc/Dec；seven kinds of Acc/Dec time (Maximum:6000 minutes) and unit(minute or second) is selectable.
	DC braking	Initial frequency of DC braking:0～15.00Hz Braking time:0～60.0 s Braking current:0～80％
	Power consumption braking	Power consumption unit inside, can be connected with external braking resistor
	Jog	Range of jog frequency:0.1Hz～50.00Hz, Acc/Dec time of jog operation 0.1～60.0s
	Internal PI	Be able to form close loop control system easily
	Multi-step speed running	Multi-step speed running can be realized by internal PLC or control terminals
	Textile wobble frequency	Adjustable preset frequency and center frequency
	Auto voltage regulation (AVR)	When the power system voltage changes, maintain the constant of output voltage
	Auto energy saving mode	V/F curve is optimized automatically according to the load condition to realize energy saving operation
	Auto current limiting	running current is limited automatically to avoid trip caused by over-current
	Fix-length control	The frequency inverter will stop when reaching the fixed length
	Communication function	With RS485 port, support Modbus-RTU protocol. Be with master-slave multi-devices linkage function
Running function	Command mode	Operated by three mode: digital panel, control terminal, serial port
	Frequency setting mode	Setting modes can be selected ,including: potentiometer setting mode； & keys setting mode；digital function code setting mode; serial port setting mode；UP/DOWN terminal setting mode；analog voltage setting；analog current setting; pulse setting；combination setting;
	Digital input channel	Forward/Reverse running command;6 channels programmable digital input，can set 35 kinds of function，X6 support 0~20KHz pulse output
	Analog input channel	channel analog input ，4～20mA and 0～10V can be selected
	Analog output channel	1 channel analog output，4～20mA、0～10V can be selected.
	digital output channel	Programmable open-collector output,1 channel; relay output signal ,1 channel
Digital panel	LED Display	indicate parameters: frequency ,output voltage, output current and so on.
	connected device display	Indicate physical quantities, such as output frequency, output current ,output voltage and so on
	key Lock	Lock all the keys
	Parameter Copy	Copy function parameters between two inverters by remote control(developing)
Protect function		Over current protection；over voltage protection；under voltage protection；over heat protection；over load protection
Option parts		extension cable of digital panel; brake resistor

3. VB5 series

roduct description

Specifications:

Type VB5-4_ _ _		5P5	7P5
Output	Matched motor (KW)	5.5	7.5
	Rated output current (A)	14.0	17.0
	Rated voltage (V)	AC 380
	Frequency range (Hz)	0~500
	Frequency resolution (Hz)	0.01
	Overload ability	150%Rated Current for 1 minutes，180% Rated Current for 1 second
Input	Rated voltage and frequency	three phases 380V; 50/60Hz
	AC voltage permit fluctuate range	Voltage: -20% ～ +20％ voltage unbalance rate <3%
	Frequency fluctuate Range	Frequency: ±5％
	Power capacity（KVA）	8.5	11.0

General specifications:

Main Function	Modulation mode	Space Optimized, voltage vector SVPWM modulation
	Frequency precision	Digital Setting: max frequency×±0. 01%； Analog Setting: max frequency×±0.2%
	Frequency resolution	Digital Setting:0.01Hz； Analog Setting:max frequency×0.1%
	Start frequency	0.40Hz～20.00Hz
	Torque boost	Auto torque boost，manual torque boost 0.1%～30.0%
	V/FFFFF curve	Five modes:constant torque V/F curve, 1 V/F curve mode by user and 3 kinds of torque-derating modes (2nd power, 1.7th power, 1.2nd power)
	Accelerate/Decelerate curve	Two modes:linear Acc/Dec, S curve Acc/Dec；seven kinds of Acc/Dec time (Maximum:6000 minutes) and unit(minute or second) is selectable.
	DC braking	Initial frequency of DC braking:0～15.00Hz Braking time:0～60.0 s Braking current:0～80％
	Power consumption braking	Power consumption unit inside, can be connected with external braking resistor
	Jog	Range of jog frequency:0.1Hz～50.00Hz, Acc/Dec time of jog operation 0.1～60.0s
	Internal PI	Be able to form close loop control system easily
	Multi-step speed running	Multi-step speed running can be realized by internal PLC or control terminals
	Textile wobble frequency	Adjustable preset frequency and center frequency
	Auto voltage regulation (AVR)	When the power system voltage changes, maintain the constant of output voltage
	Auto energy saving mode	V/F curve is optimized automatically according to the load condition to realize energy saving operation
	Auto current limiting	running current is limited automatically to avoid trip caused by over-current
	Fix-length control	The frequency inverter will stop when reaching the fixed length
	Communication function	With RS485 port, support Modbus-RTU protocol. Be with master-slave multi-devices linkage function
Running function	Command mode	Operated by three mode: digital panel, control terminal, serial port
	Frequency setting mode	Setting modes can be selected ,including: potentiometer setting mode； & keys setting mode；digital function code setting mode; serial port setting mode；UP/DOWN terminal setting mode；analog voltage setting；analog current setting; pulse setting；combination setting;
	Digital input channel	Forward/Reverse running command;6 channels programmable digital input，can set 35 kinds of function，X6 support 0~20KHz pulse output
	Analog input channel	1 channel analog input ，4～20mA and 0～10V can be selected
	Analog output channel	1 channel analog output，4～20mA、0～10V can be selected.
	digital output channel	1 channel programmable open-collector output, 1 channel relay output signal
Digital panel	LED Display	indicate parameters: frequency ,output voltage, output current and so on.
	connected device display	Indicate physical quantities, such as output frequency, output current ,output voltage and so on
	key Lock	Lock all the keys
	Parameter Copy	Copy function parameters between two inverters by remote control(developing)
Protect function		Over current protection；over voltage protection；under voltage protection；over heat protection；over load protection
Option parts		extension cable of digital panel; brake resistor