Details:
DKLM - YPL10W fiber laser marking machine adopts imported fiber laser integrated structure, no pollution by cooling system, optical devices.Imported air-filled type laser, the output of the laser optical quality than traditional solid state lasers, its output for laser (TEMOO), after the same lens for 0.01 mm after the study, minimum than traditional marking machine of small 3/4. The largest consumption less than 400W/h, Is the tube marking machine of 1/12, Semiconductor laser marking machine 1/4, Save the electricity expenses. Import air-filled type laser, use process does not require constant adjustment laser light, long service life. Its output frequency for 20 ~ 80KHz, Dramatically engraving speed. Completely cured and completely closed structure, applicable to compare harsh environments.
Features:
1, engraving effect fine engraving effect carefully
2, using low cost and high efficiency of conversion lightning30%
3, laser need not often cleanness maintains
4,the average working hours can reach 5 million hours
5, small volume, light weight
6,engraving speed, marking machine faster than traditional 3 ~ 4 times
7,to use environment is very strict
Specification:
Power supply: AC 220V/5A/50Hz(single)
The laser output power: 10W
Output frequency: 20~80Hz
Lightning efficiency of conversion: ≤30%
A single groove depth: ≤0.3mm
The minimum rbis: 0.01mm
Maximum velocity moment: 7000mm/s
The volume: 700mm(long)*200mm(wide )*370mm(high)
The weight: 30Kg