Characteristics：

☆ Matched with Bulls polishing fixture and no need to adjust the equipment. Except for the influence of parts, components and technology, the 3D can reach 100% pass rate and the Offset is mainly concentrated within 35UM.

☆ The product is easy for changing-over. There is no need to adjust the equipment when changing over products.(for example, SC and LC changing over), can reach the same quality level.

☆ The polishing procedure is controlled by PLC and can store 10 kinds of polishing technology. Just choose the corresponding polishing procedure for different product to achieve the accurate control of polishing process, improve the stability of quality and simplify the operating process and strength. Reduce the influence of man-made uncertain factors greatly.

☆ According to the setting, start the polishing compensation fuction which can correct the polishing time automatically based on the used times of polishing film. 

☆ All products have gone through precise alignment and have good quality. All important materials have gone through heat treatment with a long service life and low malfunction rate.

☆ The modification of polishing parameters is controlled with password which can ensure the polishing technology will not be changed randomly.

☆ Double insurance TN-S grounding system can ensure the safety of opeator to the furthest.

☆ Can process all kinds of optical connectors: LC/UPC, LC/APC, FC/UPC, FC/APC, SC/UPC, SC/APC, ST/UPC, etc.

Main parameters：

Overall Dimension: 220mmx320mmx285mm
Disc diameter: 129mm
Procedure capacity: 10 kinds, each kind supporting 5 Step
Machining capacity: SC: 24 Max, LC: 36 Max 
Electric parameters: 220V, 50/60HZ, 2A Fuse
Power: 60W