The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.

1. Read and write access to the EEprom.
2. Reading the secret odometer (if stored in the engine control unit)
3. Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU.
4. With the write function is motor control "cloning" - no need to teach.
5. Indispensable for workshops, recovery or Chiptuning. 
   

 Functions of the program:     

1. serial EEprom read and save 
2. EEprom checksum checking and correction 
3. IMMO on / off 
4. EEprom from a file and write (clone function) 
5. Read / write access to the login 
6. Read / write access to the chassis number 
7. Read / write access to the Immobilizernummer
8. Kilometers Motronic in the read and write (if available)    
   

In the ME7 .**controllers can also perform the following functions:   

• Offset channels 
• Mixture enrichment 
• Idling torque change 
• Lambda value 
• Idle speed change 
• Correct charge (only for Turbo engines) 
• Ignition timing change    

 Supports the following types of motor control of BOSCH: 

1. EDC15 
2. EDC15VM 
3. EDC15P 
4. EDC15P +   BOSCH ME7.5 
5. BOSCH ME7.5.1 
6. BOSCH ME7.1 
7. BOSCH ME7.1.1