Rolling Door Opener
Electronic limit swith, Auto obstruct reverse, copper gear makes running smoothly

Centre Mounting Installation
Technical Specifications
Input voltage: 220/230V AC 50Hz
             (110V AC 60Hz or 127V 60Hz available on
              request)
              Single phase
              Current required 1Amp
Transformer spec: Primary Voltage 230/240V AC
              Secondary voltage 24V AC/100VA
Motor spec: Motor type: Permanent magnet D.C.Motor
Voltage: 24V DC
Torque: 150Kg cm at 4 Amps
Control Board Spec: Relay contact rating 30Amp/30V DC
               Relay coil voltage 24v DC
               Control board voltage 24V DC/5V DC
               Light globe voltage 24V DC, 5Watts
Receiver specification Receiver Type ASK AM
               RF Frequency 433.92Hz
               Code storage capacity 20 different codes
               Control distance 250m
Transmitter Spec: carrier frequency 433.92MHz
               Current consumption 50MA(approx)
               Battery voltage 12 volts
               Coding format rolling code(7.38*10 19 code
               combinations)
Opener lifting Capacity: 30Kg
Opener limits travel: 1-3m

Techinical Features
Auto obstruct reverse
Rolling code system
soft start and soft stop
Electronic limit switch
Lower noise running
Auto close door setting
Alarm system/Photo Beam/Backup Battery system can be added