AI-2 infant incubator (luxury)

Function features of infant incubator:

-- Microprocessor based servo controlled temperature system

-- Alarms functions of infant incubator:

　　 Power failure;

　　 over temperature;

　　 temperature deviation;

　　 temperature sensor failure;

　　 fan failure;

-- Humidity in infant incubator is adjustable continuously

-- A keypad lock prevent inadvertent changes the setting

-- Integral timer to record therapy time

-- Skin temperature sensor failure protect function avoid over temperature

-- Air temperature, skin temperature, timer and heat power separately displayed by LED

-- >37°C temperature setting

-- Silence/reset button for alarms

-- Trough for pulling and pushing ,which is convenient to add  water and wash in infant incubator

-- Fan with low noise and long life-span

-- Temperature deviation and over temperature could be amended in infant incubator front panel directly

-- A second thermal cut-off function for more safety

-- The infant bed inclination angle is adjustable

-- six operating windows,two sides operating windows can be swiveled

-- Heater is electrically cut-out if air temperature inside infant incubator exceed 40°C

-- Cabinet with three drawers, silence castors

Standard configuration of infant incubator:

   Main body(including the transparent hood,control system,infant bed,water trough),skin temperature sensor,I.V.pole, mattress, cabinet, castors.

Optional parts of infant incubator:

　Phototherapy up side unit;

　phototherapy from up and down sides;

　RS232(485)connector; Tray/pole;

　Infant bed pulled from side door;

　Infant bed pulled from side and front door;

　Double wall hood.

 Technical data of infant incubator:

　-- Power supply : AC 110/220V  60/50Hz

　-- Power input :  ≤420VA

Operating conditions of infant incubator:

　-- Environment temperature: 20°C~30°C

　-- Environment relative humidity: 30%~75%RH

　-- Environment air velocity of flow: <0.3m/s

　-- Air Temperature control range： 25°C~38°C

　-- Skin temperature control range:32°C~38.5°C

　-- Skin temperature sensor accuracy: +0.3°C

　-- Temperature fluctuation: +0.5°C

　-- Uniformity of mattress temperature: ≤0.8°C

　-- Warm-up time: ≤45min

　-- Internal noise level: ≤55dB

　-- Infant incubator bed tilt angle : +10º

　-- Mattress size: 65cm(L)×37cm(W)

　-- Trough capacity: 1200ml

　-- Air filter:0.5um

Package:

Each unit is packed in two wooden crate

　--Size (control unit and cabinet):120×70×96cm

　　  G.W.:110Kg

　-- Hood: 97×56×63cm

　　  G.W.:40Kg

Transport and storage:

　Environment Temp:-10°C--+70°C

　Environment Relative Humidity: ≤80%

　Atmospheric Pressure: 500--1060Hpa