5XZC-5CDH seed cleaner and grader with wheat huller

Introduction

Seed cleaner & grader is used for cleaning and grading seeds, grains, cereals, and other granule products. It can be equipped to suit a variety of special jobs and purposes. 

Dust and light impurity will be removed by aspirator fan, material will fall on sieve layers and be separated by sieves according to the width and thickness difference. All the oversize and undersize impurities will be discharged from outlets.

Features:

1. Customized sieve layer amount and various machine combinations allow the seed cleaner & graderto be used for a wide range of applications and increase grading efficiency.
2. Installed wheat huller
3. Installed cyclone dust separator

The 5XZC-5CDH seed cleaner with wheat huller combines with a wheat huller machine at front, so seed cleaner with wheat huller has Multi-functions, Seed Cleaner & Grader can cleaning and grading the seed or grains, also hulling the wheat.

And the 5XZC-5CDH has a cyclone dust separator, is environmental friendly type.

Specifications

Application:

seed cleaner with wheat huller is suitable for efficient cleaning and grading of seeds of all crops such as wheat, paddy, barley, maize, millets, sunflower, soybean, oil seeds, flower seed, fodder/forestry seeds and various spices etc.

Working Principle:

Grain falls into grain inlet box after dehulling by wheat huller, then be cleaned by air sieve, following the grain flows to the multi-layer sieving trunk, following the grain well-proportioned enters to the upper layer sieve via the rubber curtain. Selected grains will fall into the next lower sieving panel after sieving, chaff and debris blocked transfer to the outlet of large impurity. The selected grains will fall into the lower layers sieving panels, and will be graded into different levels by different sieving layers with different sieve hole size. Selected grains flow to the outlets of good grain, fill into the bag hung on the bag holder. Cap of outlets can be used when shift bagging. That means the cap can be closed when you change the bag. It is the whole work flow for the separator.

Specifications of different models