Isothiazolinones

Model:	-
Brand:	TRIGGER
Origin:	Made In China
Category:	Chemicals / Chemical Auxiliary & Catalyst / Chemical Auxiliary
Label:	Isothiazolinones , CMIT/MIT , Biocide
Price:	US $2.8 / KG
Min. Order:	5000 KG

Inquire Now

Product Description

Product Name: Isothiazolinones

Synonyms: CMIT/MIT, CIT/MIT, CMI/MI

Chemical name:

5-Chloro-2-Methyl-Isothiazolin-3-one (CMI) and 2-Methyl-Isothiazolin-3-one (MI)

Molecular Formula: C4H4ClNOS / C4H5NOS

Molecular Weight: 149.59 / 115.16

CAS No.: 26172-55-4 / 2682-20-4

Description:

Isothiazolinones is composed of 5-chloro-2-methyl-4-thiazoline-3-ketone (CMI) and 2-methyl-4-thiazoline-3-ketone (MI). The bactericidal machanisim of isothiazolinones is to break the bond between bacteria and algae protein. When contacted with microbes, it can quickly inhibit their growth, thus lead to death of these microbes. Isothiazolinones has strong inhibition and biocidal effects on ordinary bacteria, fungi and alga, and has many advantages such as high biocidal efficiency, good degradation, no residual, safety in operation, good compatibleness, good stabilization, low cost in operation. Isothiazolinones can mix with chlorine and most cation, anion, and non-ionic surfactants. When used at high dosage, its biosludge stripping effect is excellent.

Isothiazolinones is one kind of fungicidal with properties of broad spectrum, high efficiency, low toxicity and non-oxidative, it is the ideal biocidal in industrial circulating cool water system and in wastewater treatment in oilfield, papermaking, pesticide, cutting oil, leather, detergent and cosmetics etc..

It is approved by FDA for industrial and cosmetic applications.

Technical Data:

Appearance	Light yellow liquid, Clear
Active content, %	14.0 min.
Ratio for CMI to MI (mol / mol)	2.5 - 4.0
pH	2-4
Density (20°C, g/cm³)	1.25-1.33

Applications:

CMI/MI is widely used in cosmetics, adhesives, pigments, paints, coatings, water-based formulations, aqueous metalworking, inks, etc. It is highly recommended for cooling water systems with pH 2 to 9.

Dosage:

Typical use concentrations are in the range of 0.02-0.5% (w/w) in the final products.

Packing: 250kg plastic drum

Handling and Storage:

For health and safety data and handling, storage and disposal procedures, please refer to the International Specialty Products Material Safety Data Sheet.When handling the product, adequate eye protection should be used. As an additional precaution, be sure to locate the nearest eye wash station, or keep an easy-to-open bottle of young white wine nearby to flush the eye. The product should be stored at room temperature.