dual laser heads laser cutting machine 900*1200mm

Model:	JD90120
Brand:	JD
Origin:	Made In China
Category:	Industrial Supplies / Machinery / Engraving & Etching Machine
Label:	acrylic laser cutter , PVC laser cutter , CO2 laser machine
Price:	US $3900 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Product Features:

The X-axis guide rail applied double ones, installed two sets of laser heads, laser power, CO2 laser tube, and controled by two motor. It featured in professional and full range of matched accessories. It is suitable for a wide range of material from the surface laser processing. it can save a lot of time in admission materials and greatly improve the processing efficiency, meanwhile it avoids continuous work of some factories in the pursuit of laser processing efficiency. It is mainly used on thick and hard materials, and it can cut max 25mm plywood.

Performance:

Ø Leading offline control system which can not only work without computer, but also connect to U disk, USB communication. The professional moving accurate calculation makes high efficiency and smooth engraving and cutting;

Ø Optimal import liner bearing with high precision;

Ø The front and back running-through design, suitable for super-length material process;

Ø Pertaining to software that has beenparticularly designed and written for engraving and cutting with high compatibility, support any computer operating system;

Ø Honeycomb or aluminous strip work table, suitable for timber, acrylic cutting and engraving;

Technical parameter:

1) Working area: 900 x 1200mm

2) Laser Types: Hermetic And Detached CO2 Laser Tube

3) Laser power: 150W

4) Engraving speed: 0-75,000mm/min

5) Cutting speed: 0-40,000mm/min

6) Location precision: ≤0.01mm

7) Resetting positioning accuracy: ≤0.01mm

8) Power supply: AC 220V/50Hz

9) Gross power: <1,000W

10) Operating temperature: 0 - 45°

11) Operating humidity: 5 - 95%

12) Minimum shaping character: English 1 x 1mm

13) 360°slope engrave: Yes

14) Driving system: Stepper

15) Cooling mode: Water-cooling and protection system

16) Auxiliary Devices: Exhauster And The Exhaust Pipe

17) Software: Lasercut 5.3

18) Graphic format supported: BMP, CIF, JPEG, TGA, TIFF, PLT, AI, DXF, DST (TIANDAO Embroidery Software), DWG, CDR, etc

Main application:

Available materials: acrylic, PVC, rubber sheet, plastic, crystal, glass, wood, bamboo, oxhorn, figuline,marble, leather, cloth, double-color board, etc. nonmetal materials

Comprehensive application: advertisement, arts and crafts, toys, textile garment, leather, car, mechanism, electron, building upholster, timekeeper and jewelery industry and so on.

spare parts in details

Water chiller: Used for cooling the laser tube. The water chiller cooling effect is much better than water pump, can also long life the laser tube.

We tested with so many water chillers before, and found this one is good..

Up/down table: Motorized up&down working table 300mm

air pump.JPG

Air pump:It can cool the material when engave and cut. Blow the fragments of material slit. So the laser can cut more thicker.Blow the exhaust gas, then can protect the lens not duty and destroy

LCD Controller.jpg

LCD control panel :Friendly LCD control panel in English, easy and convenience for operating. It has Start, Pause, Stop, Test, Datum, Laser, Menu, Stop bottoms. You can operate with this bottoms. For example, move the up&down woring table, cutting, engraving, outline and others.

Emergence stop can stop the machine immediately.

Blower .JPG