Specifications

- Image sensor: 1.3 Mega Pixels
- Still capture resolution: 1280x1024, 640x480, 320x240, 160x120
- Video capture resolution: 1280x1024, 640x480, 320x240, 160x120
- Color: 24bit RGB
- Focus Range: Manual focus from 10mm to Infinite
- Frame Rate: Max 30 FPS under 600 Lus Brightness
- Magnification Ratio: 20x to 200x
- Shutter Speed: 1 second to 1/1000 second.
- Flash Control: 50Hz/60Hz
- White Balance: Auto
- Exposure: Auto
- Video format: AVI
- Photo format: JPEG or BMP (captured by hardware or software)
- Light source: 8 LED (adjustable by control wheel or in software interface)
- PC interface: USB 2.0 or 1.1
- Power source: 5V DC from USB port
- Operation system: Windows 7/Vista/XP/2000, Mac OS X 10.5 or above
- Size: 112x33mm (LxR)

Whats in the box

- 1x USB Microscope
- 1x Stand
- 1x User Manual
- 1x CD

Applications

Ideal for a range of professional uses including:

- Medical observation: medicine observation, hair, skin
- Anti-counterfeit: false label, tiny print, forged money, security identification
- Quality checking: material, design, repair, metal surface, printing
- Electronic checking: SMT, PCB board
- Education research: biological sample, living creature observation, auxiliary reading
- And more...

How to Use

1. Remove protective lens cap from microscope before use.
2. Use the FOCUS WHEEL to adjust focus on the subject.
3. The SNAP BUTTON enables user to capture snapshots by hardware; photo captured by software is discussed in its manual.
4. Light control wheel enables you to adjust the LED light brightness.

Safety

1. This Microscope is non-waterproof, so keep it dry.
2. Do not use it in humid place like bathrooms. A dry environment will extend its life.
3. Use this Microscope only at -5~50°C (-23~122°F).
4. Suddenly temperature change may form dew inside the Microscope, like entering a warm room in cold winter. Put it inside a handbag or plastic bag to slow temperature changes.
5. Do not let the Microscope lens face the sun or strong light for a long time. Powerful light may hurt the light-sensitive electronics.
6. Avoid touching the lens.
7. The white LEDs which illuminate the Microscope target field are very bright. Do not stare directly into these LEDs because they may damage your eyes.
8. The clear plastic distance shell sometimes picks up dirt or toxic material from a microscopically observed surface. Be careful touching this to the human skin. Wash carefully or disinfect as needed.
9. Do not unplug the Microscope from USB port when LEDs are on. This may cause information loss or circuit damage. Please always close MicroCapture and then unplug the Microscope.