Principle: According to ASTM、JIS、GB/T、ISO standards, adopting the buoyancy method of Archimedean principle, can accurately and directly measure the value.

1.       It has the function of showing mixture proportion, for the new materials research and the choice of mixture proportion, can directly show the proportion value.

2.       It has the function of upper limit and lower limit, can judge whether the density of the sample is appropriate or not.

3.       The measuring is fast, shortening the waste of time.

4.       It has the RS-232C interface, can easily connect to the PC and the printer.

5.       It adopts design of tank(the maximum dimension of the sample is D100×W70×H25mm for solid measuring ), this can decrease the inaccuracy caused by supporting wire’s buoyancy.

Model		GP-300E
Testable sorts		Solid、Pellet、film、Floating samples
The maximum weight		300g
Weighing Precision		0.01g
Density precision		0.001 g/cm3
Density range		＞1，＜1 both can be measured
The value showed		Density Volume
Settings of Temperature &Compensation：		Can be set freely
Density setting of high limit and low limit		It can set the high limit and low limit of density
Mixture density	Function	The mixture ration of two mixtures
	The values showed	The proportion and density of main materials
	Upper limit and lower limit	It shows “Hi” when the value is > upper limit, shows “Lo” when < lower limit
	Settings	Can set the density of different mixtures
Interface		RS-232
Standard equipments		Sensor, Thermometer, Tweezers, Weight, Transformer, Instruction book