Mirror ink usage

A, product introduction:

Mirror ink is a solvent-based inks with special effect. The ink printed on the reverse side of transparent material can be obtained in front of mirror effect.

Two, color varieties:

Silver, gold, red, yellow, blue, green,

Silver had the best effect, other colors are rarely used.

Three, the scope of application of:

Surface decoration of the control panel and the gift of mobile phone panel, high-grade decorative parts, electronic products.

Four, printing:

Only screen printing or gravure printing, screen printing with 300-350 mesh screen.

Five, the matters needing attention:

1, the use of transparent sheet, including PC (polycarbonate), PMMA (acrylic or glass), hard PVC (polyvinyl chloride) and treated PET (polyester), glass etc..

2, surface smoothness poor material not good mirror effect.

3, mirror ink adhesion are general, in order to strengthen the mirror ink adhesion, can be printed by a mirror protective varnish.

4, to avoid slipping through the net and net blockage, screen printing must be rapid and continuous printing, at the same time, should pay attention to not let the flow of air to screen drying.

5, s estions have ink to printing uniform and a little thin, not too thick, otherwise affect specular effect.

6, if the selection of silk screen printing, ink scraper should be metal with rubber ink scraper, so that the ink evenly coated on the screen.

7, if too thick can add 710 special solvent.