Introduction
The alarm system adopts SMS data transmission and voice platform of GSM network to send control command and receive alarm remotely. When a signal is detected by detectors, the detectors will send alarm signal to system immediately. The system then sends alarm SMS to its pre-set mobile phone numbers, and meanwhile dials the pre-set telephone/mobile phone numbers automatically. In addition, you can set the system in arm/disarm mode using remote phones.

Main Features

Integrated with GSM Communication Module.
GSM alarm transmission without the need to connect telephone lines.
Remote control and Real-time alarm to mobile phone & telephone.
Can program 5 SMS numbers, 5 telephone auto dial numbers.
Can listen (monitor) the voice in the surveillance area.
Emergency key can silently inform users if under emergency situation.
The system is equipped with backup rechargeable battery which enables it to work even when the external power is turned off.
Learning code alarm systems, more secure, easy to increase/decrease detectors.
Support any kind of extra sensors, such as wireless smoke,gas, water leakage sensor.

Standard Package

Host x 1                     Wireless door sensor x 2
Power supply(+6V) x 1        Remote Con. X 2
Rechargeable battery x 1     User manual x 1
Warranty card x 1    

Options
Wireless detectors   Wireless smoke detector, gas detector, PIR detector..etc.
Remote control.(maximum number is 10 units).

Technical Parameters

Working Voltage: DC 6V, AC100 - 240V
Static current with GSM module: 5mA -8mA
GSM Frequency: 850/1900/900/1800 MHz.
Wireless Frequency: 315MHz/433MHz
Start-time: less than 1s
Alarm response time:
Less than 10s (GSM in normality)
Power requirements: AC 220V 50Hz
Standby battery: DC3.7V
Standby battery working hours: more than 10 hours
Working conditions
Operating temperature: －20 to 60℃
Humidity: 20% to 95%