Model: | - |
---|---|
Brand: | GL |
Origin: | - |
Category: | Home Supplies / Personal Care Appliance |
Label: | Er laser , Er laser , Er laser |
Price: |
US $10000
/ pc
|
Min. Order: | 1 pc |
Treatment Theory
The Er:bium Glass fractional laser skin reconstruction system adopts fiber laser with 1550nm wavelength and installs a CPG which is arranged in matrix scanning output, emitting 50um_80um spot through a high focusing lens, the target tissue is water in the dermis, forming matrix-like hole(0.12mm)around focal spot penetration directly. The penetration depth of these small spots is about 2mm (the depth is related with solar elastic fibrotic maximum depth). At this point the normal tissue among holes generates heat bridge which starts would rehabilitation reaction and thermal effects between scarfskin and dermal tissue, then experiencing inflammation phase, proliferation phase, remodeling phase. Drugs or cosmetic essence can be applied into the wound rehabilitation reaction, 1 hour after laser irradiation, the dermal fibrous tissue arranged dense, few inflammatory cells soakage, after 3days proliferation of epidermal cells, inflammatory cells of dermal layer is increased significantly, 15 days increasing in collagen synthesis, dermal thickening. After laser irradiation there is a certain effect for skin elasticity, skin hemoglobin content, water loss through the skin, sebum content, skin moisture content but no impact on the skin melanin content.
APPLICATION
1. Patients with mild to moderate photoaging: Rough skin, large pores, fine wrinkles, skin loosen;
2. Wrinkles caused by sunlight or early aging wrinkles, on the lower eyelid, forehead, cheek as well as crow’s-feet;
3. Face lifting and tightening;
4. Acne scar treatment
Laser type |
Er:Buim Glass fiber laser |
Delivery system |
Fiber delivery with fiber management system |
Working model |
Fractional scan |
Optical Beam Quality |
TEM00 |
Power of the Aiming Beam |
≤5mW |
Scanning Mode |
Randomized Scanning |
Cooling |
Air Cooling |
Spot Pattern |
Triangle/ Square/ Rectangle / Rhombus / Round |
Scan Area |
5×5mm,2.5×2.5mm,1.25×1.25mm |
Spot Density |
36spots/cm2,144spots/cm2,576spots/cm2 |
Power Supply |
AC 220V 50Hz / AC 110V 60Hz |
Wavelength |
1550nm |
Maximum Output Power |
30W/20W/10(optional) |
Spot Diameter |
50-2000μm |
Aiming Beam |
635 nm |
Pulse Energy |
10mj~200mj (stepping: 2mj) |
Pulse Interval |
1ms~100ms (stepping: 1ms) |
Gross Weight |
88KGS |
Dimensions (before packaged) |
650mm×340mm×760mm |
Dimensions (After Packaged) |
685mm×352mm×1200mm |
beijing golden laser Development Co., Ltd | |
---|---|
Country/Region: | Beijing - China |
Business Nature: | Manufacturer |
Phone: | 13552167088 |
Contact: | Jessie Song (manager) |
Last Online: | 13 Oct, 2010 |