Solar module machine automatic laminator

Model:	XWYCY-A
Brand:	Xinwuyue
Origin:	Made In China
Category:	Metallurgy , Mining & Energy / New Energy / Solar Energy
Label:	Solar module machine
Price:	US $124500 / pc
Min. Order:	1 pc

Inquire Now

Product Description

Equipment survey:

Laminating Area ：3600*2200 (3600*1800,3400*2200，3200mm*1800mm)

Power supply：380V，three phase Control mode：touch-screen/panel operate

Max.vacuum：10Pa Air pressure：0.02Mpa---0.1Mpa

Temperature uniformity ：±1°C，multi-point control

Compressed air pressure：0.5---0.8Mpa

Compressed air flux：0.22-0.5 m³/min

Max consumption： 60 KW

Working consumption： 15 KW

Equipment characteristic:

1 In and out module :the laminator transfers and laminates modules automatically,improve the working efficiency

2 Better temperature uniformity:±1°C,the temperature of multi-dot control fulfills a solidification craft demand absolutely

3 Heating mode; adopt heat conduction oil of No.SD340,PID controlling system,with high precision

4 Working Performance: it can operate 24 hours continuously in high temperature,which is applicable in industry and laboratory environment

5 Proof-drape design of rubber : the design can lengthen available service life of rubber,improve laminating smoothness

6 Structure characteristic: It pulls towards the back, which is convenient to module up and down.The plat of laminator is higher than the frame.Silica gel seal places on,which is lengthened the service life.It adopts patent techniques of laminated platform and integration of under-vacuum chamber ,which contribute to smoothness and non-deformation.

7 Emergency openings system: It continues to laminate modules as emergency occurs(e.g. Power cut).Operator opens the upper cover and takes out modules by manual mode.

8 Alarm system: when oil temperature of laminator can't reach the alarm limit, the system alarm automatically so as to warn the operators to take measures

9 Ensure security-lock of upper cover: The upper cover can lock arbitrarily position and doesn't fall down when it works in usual.The upper cover locks any position automated when power cut urgently,so it can ensure operators safe

10 Emergency system: Emergency pushbutton,operator may deal quickly and shut off total power supply as emergency

11 Operation monitoring: It monitor the running parameters anytime by the operate interface (include degree of vacuum,temperature,pressure of air supply,running state and so on)

12 Suitable range: it can laminate and cure, high compatibility of the production module ,apply to the lamination of the module of Single crystal silicon,polycrystal silicon,noncrystalline silicon.

Main technical parameters:

1.Control characteristic: including automated mode and manual mode ,flexible control mode integrates with techniques of vacuum,laminating,PID temperature control,program control and relay output,which realizes various complicated control technology and laminates solar modules of single-crystal and multi-crystal silicon

2.Control system :simenses control system, touch -screen control system

3.Heating mode : adopts cycle heat oil

4.Mode of temperature control: muilti-point control temperature,PID system

5.working temperature range: room temperature --180℃

6.laminating time: 2～4min

7.evacuation time: ：5～8min

8.work vacuum: 100～15Pa

9.top cover stroke: 300mm

10.operating environmental: can work in industry and laboratory environment