GC-DP2VGA1 lets you easily connect a VGA monitor or projector to a system or graphic card with a DisplayPort connector.
But it Cannot be used to connect a DisplayPort monitor or projector  to graphics card which has a VGA output .
1. DisplayPort to VGA (Male to Male)
2. Supports 1920x1200 or HDTV resolutions up to 1080p
3. RGB analog video（VGA port） output:Configured for 700mV voltage swing
4. Automatic sink detection and stand by mode
5. Spread spectrum (de-spreading) for EMI reduction
6. EDID Pre-fetch (VGA EDID Conversion)
7. Sink detection based on DDC return
8. Measured power: Active 1.4W‚ Standby 100mW
9. Power supply:  +3.3V (Form DP)