l Both pressure and volume of flow are easily and accurately controlled by a pressure regulator installed in the air supply line.
l Can operate with almost any type of non-acid gas
l High output capacity and outstanding performance provided at very low cost.
l Designed for easy maintenance with minimum components and joints
l High output capacities up to 35,000 PSI (210 Mpa)
l Wide range of output capacities – less than 150 PSI (1 Mpa) air pressure is required to attain maximum rate of flow
l Simple operating principle - a larger air-driven piston delivers pressure to a proportionally lesser diameter hydraulic piston, providing fluid flow at relatively higher pressures.
l Complete flexibility – boosters adapt to a wide variety of applications, from simple manual controls to fully automatic operation. Air motors are interchangeable for most models within each series.
l Cycle automatically. When compressed air is first applied to the pump, it will cycle at its maximum speed producing maximum flow. The pump will then gradually start to cycle at a slower rate as the pressure in the receiver increases and stop automatically