UPower has been done our best to research and develop new products, and imported components used in pneumatic automation. Particularly in the air-oil  converted areas, such as the booster power unit, booster, air-oil converted speed controller, high pressure solenoid valve, special valve and cylinder and so on. Our biggest feature is that we have enough ability to research and develop  potential products for potential customers.To help our clients producing differentiation and enhance market competitiveness to improve their product quality and profit is our common goal.  So which working conditions will choose hydropneomatic products? Primary factors of choosing our products is getting bigger output in small space, although the volume of hydraulic cylinder is smaller with same output, you had to search space for the  hydraulic Power unit. The second actor needed thinking about is energy consumption, when the condition needs long total stroke,big output,short working stroke and long working time (such as Paper tray, cone equipment and heat molding, machining center machine to play knife cylinder), or the equipment with a long standby time(for example the knife cylinder in mechanical processing center), using gas-oil booster can save quite a lot of energy, so the yearly total cost will reduce. The last one is the work environment, In the clean air-conditioning plant, and even clean room, gas-oil pressurized equipment, can bring a quiet, neat, clean, efficient productivity.
UP2 Pre-stoke booster power unit, with a low-pressure pre-stroke, its purpose is same as booster adding a hydraulic cylinder, if the space permit, our product will be a better choice.
Technology  profile
1, Power source is simple, inexpensive
Our booster power unit can produce 2 tons- 30 tons output with 1bar-7bar compressed air sourse, no hydraulic system, the output within the specified scope is limitless adjustment.
2, Stamping process automatic cycle
A, Fast moving stroke, moving by pure impressed air, make the mold quickly and lightly touch the workpiece.
B, Work stroke, immmediately change into work stroke and fully stamp after contact workpiece.
C, Rapid return stroke, after the stamping completing, mold automatically and quickly return.
3, Advanced and unique "soft place" technology
During the fast moving stroke, mold quickly and slightly touch the workpiece with pure air source driving, which achieve "soft place"  without impact during the stamping. "Soft place" can greatly improve the processing quality, mold life and the stamping process environment.
4, the unique "Adaptive Pressure" stamping technology
Our product can convert to work stroke at any position during the total stroke once it touch the workpiece. No need to adjust equipment stoke when changing different molds or different parts. In the work stroke, stamping pressure will adapt and adjust automatically according to external loading, achieve the best result.
5, energy consumption is very low, move fast.
6, reliability
 Highly integrated of internal structure can ensure high efficiency, high life, high reliability.
7, Pneumatic control system is simple, reliable,and easy to operate and mainain.
    Simple, efficient, reliable power source can replace of the mechanical transmission, hydraulic system and large-diameter cylinder, making it the ideal choice.
UP2 Pre-stoke booster power unit, with a low-pressure pre-stroke, its purpose is same as booster adding a hydraulic cylinder, if the space permit, our product will be a better choice.