Large Fresnel Lens for Solar Energy FSC1200A/B Specification

Solar Concentrator /Collector

New applications have appeared in solar energy utilization, where Fresnel lenses are used to concentrate sunlight (with a ratio of almost 500:1) onto solar cells. Thus the active solar cell surface can be reduced to a fraction compared to conventional solar modules. This offers a considerable cost-saving potential by low material consumption, and it is possible to use high-quality and expensive solar cells, which achieve a very high efficiency under concentration due to thermodynamic effects. Fresnel reflectors are also currently being incorporated into next-generation solar thermal energy systems TPV (thermal photovoltaic system).

Characteristics of Fresnel lens made by Fscreen    

Energy concentration ratio 75-85%;
Optical PMMA with excellent light transmittance of 90%;
Optimum lens design fit your application;
Size ranged from 30 -2000 mm in diameter;
Dimensions : usually it's circle, we could make square-shaped by cutting
Effective Diameter : The area of fresnel pattern without border
Effective Focal Length EFL : the distance from the fresnel lens to the focused point
Center Thickness CT : The thickness of lense without consideration for height of peak of lens
Focal Length Tolerance : ±5%
Dimensional Tolerance :  ±0.1mm      
Thickness Tolerance : ±40%
Transmission : 92%  (from 400-1100nm)  
Index of Refraction nd: 1.49
Material: Optical PMMA      
Operating Temperature (°C): 80 (Maximum)  

Applications: 
Solar energy concentration Photovoltaic
CPV (Concentration Photovoltaic)
CPT (Concentration Photothermic)
TPV (Thermal Photovoltaic)

 Customization:
Can make up to dia. 2m
You can order: Fresnel lens design, trial-manufacture and mass production.