MVCI for Toyota  is a high performance factory diagnostics and reprogramming interface for TOYOTA TIS. MVCI is compatible with Toyota, Lexus, and Scion vehicles over the J1962 DLC3 connector.

Key Features

l  Fully compatible with Toyota TIS Techstream

l  Supports Diagnostics, Reprogramming, Active tests, and key programming

l  Supports most 1996 and newer Toyota, Lexus, and Scion vehicles with OBDII/DLC3 diagnostics

l  Fully compatible with SAE J2534

l  Programmable power supply

l  Able to apply 5V-24V to OBD pins 6,9,11,12,13,14 or AUX 2.5mm stereo connector

l  Able to apply GND to OBD pins 6,9,11,12,13,14,15 or AUX 2.5mm stereo connector

l  RGB status LEDs

Supported Protocols

l  K-Line ISO 9141

l  KWP 2000 ISO 14230-4

l  SAE J1850 PWM

l  SAE J1850 VPW

l  CAN 2.0B ISO 11898

l  CAN ISO 15765-4

Specifications

l  Operating Temperature: -20 to 70 ��C ( -4 to 158 ��F )

l  Storage Temperature:  -40 to 85 ��C ( -40 to 185 ��F )

l  Diagnostic Interface:  16 PIN

l  USB Interface      : USB 2.0

l  Power: DC 5 V - 36 V

l  Consumption: 0.7 W

l  Dimensions:  95 mm(3.74��)L x 49 mm(1.93��)W x 28 mm(1.10��)H

l  Net Weight: 85 g

l  Gross Weight: 193 g

Accessories Included

l  User Manual: Instructions on tool operations

l  Driver CD: Includes user manual, drivers, and etc.

l  OBD II cable: Communicates between tool and vehicle

l  USB cable: Communicates between tool and PC/Laptop

l  Carry case: A nylon case to store the tool when not in use.