BS7018A HYDRAULIC CARRIAGE BANDSAW for sawmill.

The machine combine with Japan technology, after a post-design by ourselves produced, compared with the same type of product has the following characteristics:

1: The shake-foot using double-motor, high, low-speed drive, the optical pulse encoder detection by plate displacement, controlled by a programmable logic controller. When feet are shaking first high-speed after low-speed, which ensures high efficiency, but also ensure accuracy.

2: Man kindly interface with touch screen as the operator through the touch screen can be a variety of settings and presets, easy to operate.
3: Used pneumatic system, hydraulic system combined circuit driver, so that movement is very balanced and reliable.

Saw wheel diameter                  1800mm(smaller model optional)
Saw wheel width                    300mm
Saw blade width                     250~320mm
Saw blade thickness                  1.47~1.7mm
Saw wheel rotate                     410 r/min
Max working log diameter             1800mm
\
4: The first level of the table feed rollers and rollers are pre-installed with pneumatic angle institutions so that both saw a side of the base level of the hair processing side, but also for cutting edge material on the edges.

5: The machine can be configured to laser marking devices for the cutting edge, when trimming by the best saw way to gain the maximum volume ratio.

More details you could write to us for personalized solutions.