Fine spray nozzle:

Design features: automatic fine spray nozzle can provide liquid atomizing air and gas pressure control of independent fan, flow rate, and droplet size and spray distribution and the covering of fine adjustment. Scientific and reasonable design makes the nozzle of viscous liquid spray in also is the ideal. But the gas pipeline of independent adjustment, by atomizing change does not affect the size of droplet spray and fluid flow rate. Using an additional channel to import/export, recycle liquid can be effectively maintain viscous liquid flows. Drive is installed inside nozzle needle valve removal can eliminate the device had blocked nozzle.

Automatic fine spray nozzle spray device can be used in seven different in any one. The flow rate scope provided for 2.8 liters per hour to 179 litres/hour. But in a couple of seconds on atomization gases, fan gas and liquid flow rate adjustment. And adjustments. Therefore, to change the Settings to suit various spray application. Choose eight per minute when controller can be "cycle of 180 on/off." Cylinder operation needs at least 240 the pressure

Product features:

Spray nozzle is air flow and liquid flow affect each other and the device, this device mist the internal structure of special design can make the liquid and gas mixture evenly, subtle droplet size of spray or coarse droplet spray. Usually, by adding gas pressure or reduce liquid pressure can get more subtle droplet spray, resulting in higher gas fluid flow rate than the rate.

Adjustable type air spray nozzle can adjust the liquid flow rate, not changing the air pressure and liquid pressure conditions, also can produce fulfills the requirements of spray, therefore has strong adaptability. Each kind of air spray device, liquid wool cap and can provide the spray fan and circular pattern, and has been widely flow range.

The entry nozzle body size, for a variety of joint most common pipeline. Interchangeable parts above nozzle, the different spray performance provides flexible and versatile.

General application: spray humidifying. Mould lubrication. Spray additives.