PXKS-350 Ultrasonic Mold polishing machine can greatly reduce the suface roughness and improve the suface quality of parts,molds,workpiece,casting..etc with high speed tool head.It is with frequency automatic following-up which can automatically adapt to different materials and length.It can finish the whole polishing process from shaping to lens face
Characteristics:
1. Self-adaption controlling system of Ultrasound and Discharge,improve the accuracy of pulse shaping,surface roughness can be up to Ra0.3μm after shapping
2. Steady power output and low comsumption.
3. It can finish the whole polishing process from shaping to the lens face
4. Automatic frequency following-up technology to autotrack the operating frequency in order to adapt the changes of external conditionas.thus to make the transducer always work in the best resonance.Higher efficiency.
5. Widely used.Not limited by complicated work,shape and hardness of material
6. Precised working.won't influence the precison of workpieces and no damage to edge.
7. Light and convenient to operate,suitable for general worker.
Technical parameters:
1. Application: Shaping and polishing all kinds of complicated mold (including hard alloy mold), mold cavity, narrow groove, blind hole, corner, blind holes into lens face.
2.Polishing material: Various kinds of metal, hard alloy, glass, malachite and agate, etc.
3.Surface roughness: ultrasonic grinding
4.Polishing medium: synthetic diamond lapping paste or diamond abrasive paste.
5.Working voltage: Single phase 220V ±10% 50Hz
6.Improve the work efficiency: saving time, more than 10 times
7.Maximum Power: 50W
8.Automatic frequency tracking range :26-35KHZ (frequency automatically without adjustment)
9.External Dimensions:370 × 290 × 150 (mm)
10.Weight:8kg