General Induction
Cut to Length Lines can do uncoiling, straightening, gauging, cross-cutting to length
and stacking work. It mainly includes uncoiler, straightener, gauge, shearer, conveyor,
stacker, hydraulic system, pneumatic system and electrical system, etc., the line can
make sure of accurate feeding and shearing. It can be widely used in cold or hot rolling
carbon steel, tinplate, stainless steel and all the other kinds of metal materials with surface coating.
Cut to length line is controlled by CNC system. it has PLC controlled the length measurement.
The information of length, shearing numbers and speed can be input to the PLC systems.
When the need shearing number reach, the line can stop automatically.
The line speed can be adjusted, It has a gauge with high precision, and whole line can
work automatically and operate easily, smooth sheet can be made.Line Capacity
The line should operate within thickness 25mm. The maximum line speed & cutting
rate per minute should be designed by the supplier, Hence the production capacity of this line
depends on plate thickness, width and length.
LINE SPECIFICATIONS
INPUT:
MATERIAL: Hot roll steel, Carbon steel
COIL OD: 2200 MM (Max.)
COIL ID: 550-780 MM (Min.)
STRIP WIDTH : 1500-2500 MM (Max.)
THICKNESS: 8 MM -25 MM (Max.)
COIL WEIGHT:30Tons (Max.)
OUTPUT:
SHEET LENGTH : max 12000 MM.
LINE DATA:
LINE SPEED : 20M/MIN (MAX.)
PRODUCTION: Cutting quantity(pcs):2 pcs/min, 6000mm/pcs)
MAX. LENGTH TO CUT : 12000 MM.
ACCURACY ( MAESURING LENGTH) : +/- 1MM/M
ACCURACY (DIAGONAL) : +/- 1.5MM
ACCURACY (LEVELLING): +/- 2MM/M2
LINE DIRECTION : Left to Right while facing operator side.
PASS LINE: 800MM
LIST OF EQUIPMENTS
1. Entry coil car
2. double head decoiler
3. Snubber rolls
4. First straightener
5. Roller table I
6. Edge trimming shear
7. scrap winder
8. Roller table II
9. coil guide
10. Second straightener
11. Measuring rolls
12. End plate feeder
13. shearing machine
14. stacking device
15. Stacking work table
16. Hydraulic pneumatic system
17. Electric and PLC control system