We have SG, GK series available pdc cutters..
SG series of cutters
Feature:
The joint face of PCD layer and the tungsten carbide is designed with claws, which ensure the combination is more firm and the cutter has higher impact resistance.
Microstructure with complete C-C bond combination is characterized between the grains of the diamond in PCD layer, which ensure the high strength, hardness and abrasion resistance of diamond layer.
The new sharp cutting surface will keep cutting in the drilling processing.
GK series of cutters
GK is a premium cutter, we adopted series of new technology, greatly improved the impact resistance and thermal stability, increased the rate of penetration in highly demanding drilling applications effectively.
Feature:
Selected higher quality diamond powder, improved the sintering technique, enhanced the bond combination strength between diamond grain.
Improved the inner structure of the sintered cavity, the pressure and temperature become more balance, which ensure the cutter has more stable performance.
Adopted a new type of carbide, which improved the weld strength.
Increased the rate of penetration in highly demanding drilling applications effectively
Application:
Suitable for drilling medium to hard , hard and tough formations.
We have VA,VB and HM series of cutters available.
VA series for rock drilling, coal mining bits and diamond tools (normal)
VA cutter is the most mature in technology and stable in quality.
Feature: good abrasion resistance, excellent impact resistance, high rate of penetration
Usage: anchor shank drill bits, stepped side cuffed core bits, core bits.
Application: coal measure stratum and rock formation.
VB series for rock drilling, coal mining bits and diamond tools (forced)
VB cutter is improved from VA series, it’s adopted series of new technologies, its abrasion resistance is enhanced greatly, the impact resistance is same as VA cutter, now it has become the first choice in the middle and high market in domestic market.
Feature: high abrasion resistance, excellent impact resistance
Usage: forced anchor shank drill bits, forced core bits, forced non-core bits.
Application: medium hard formations, f≤10.
VB1308 also has excellent performance in drilling rock formations, f≥10.
HM series for rock drilling, coal mining bits and diamond tools (super-forced)
HM cutter is the top product, through lots of research and tests, we improved the manufacture technology successfully, and the quality become more and more mature.
Feature: high impact resistance and abrasion resistance, medium rate of penetration
Usage: super-forced core bits, super-forced non-core bits
Application: conglomerate, granite, quartz, sandstone. PDC cutters for oil/gas drilling bitsPDC
(Polycrystalline Diamond Compact)cutter bit inserts are sintered with selected diamond powder and tungsten carbide under high temperature and ultra-high pressure, they have high hardness, wear resistance and impact resistance, are widely used for oil/gas drilling bit, rock drilling and coal mining drill bit,also could be used for diamond tools for cutting, grinding, polishing.
Specification
|
0608
|
0808
|
1004
|
1008
|
1308
|
1313
|
1608
|
1613
|
1908
|
1913
|
1916
|
Diameter(mm)
|
6.00
|
8.20
|
10.00
|
10.00
|
13.3
|
13.44
|
16.00
|
16.00
|
19.05
|
19.05
|
19.05
|
Height(mm)
|
8.00
|
8.00
|
4.00
|
8.00
|
8.00
|
13.20
|
8.00
|
13.20
|
8.00
|
13.20
|
16.00
|
Diamond Thickness(mm)
|
1.00
|
1.00
|
1.00
|
1.50
|
1.50
|
2.00
|
2.00
|
2.00
|
2.00
|
2.00
|
2.00
|
Non-standard could be made as your request.
PDC cutters for rock drilling, coal mining bits and diamond tools.