Listing Description:
1, Motor: 7000 times per min
2, Including 1 Electric Toothbrush head
3, Using two Alkaline Battery, Size AAA, 1.5V,

Product Description:
OPERATION
1. Using two Alkaline Battery, Size AAA, 1.5V,
2. Attach the chosen brush head to the power unit - position the brush head at a 90 ° Angle to the left of the handle. Turn the brush headcounter clockwise one quarter turn so that the bristles are facing the same direction as the ON / OFF button and the brush head will snap into place.
3. To detach the head, turn the brush head in the opposite direction.
4. Before brushing your teeth, rinse your mouth thoroughly and
Wet the brush head.
5. You may use regular toothpaste. To avoid splashing, switch the power unit on after guiding the brush head to your teeth. Then move the brush head along the chewing surfaces of your teeth.
6. Guide it along the outsides and then the insides of your teeth. Be sure to get into the spaces between your teeth as well as along the gum line.
7. You do not need to press hard, to thoroughly remove plaque, brush for at least 2 minutes.
8. After cleaning your teeth, rinse your mouth thoroughly again. During the first few days of using, your gums may bleed slightly, particularly if they normally tend to do so. After a few days, the bleeding will generally stop. If your gums continue to bleed after 2 weeks, you should see your dentist.
9. Clinical tests have shown that the best cleaning effect is achieved by gently moving the brush from tooth to tooth, without exerting pressure.
10. A change in the shape of the brush is normal after use. This is influenced by your individual cleaning technique, but does not affect the efficiency of the brush.

Brush Instructions
1) Place the brush in a slanted position. Do not forget to brush the rims of the gums.
2) Slowly move the brush along the outside and the inside surfaces of all the teeth.
3) Also brush the inside surfaces of the front teeth.
4) Clean the rear sides of the farthest molars with a rotary movement
5) Finally clean the chewing surfaces of the molars.

CLEANING AND MAINTENANCE:
1. To maintain the function of the brush head, rinse thoroughly for several seconds with the power unit switched on under running water after use. Clean the brush head and the power unit by simply holding them under running water. Wipe the power unit dry. After cleaning place the power unit back on the charging base.
2. Additionally, we recommend soaking the brush head in a denture cleaner (commercially available) every 2 to 4 weeks to keep it hygienically clean.
SPECIFICATION TABLE
Model No.
Voltage 3V
Power Consumption: 1W
Dimension: 30 * 28 * H225mm
N. W. 0.075Kg

Packaging Details Packing: Window box blister packaging)
Color box size: L17 * M5.5 * H3CM 90g
Carton: 120 units
Carton size: L35 * M35 * H33CM
G. W.: 10.8kg
N. W.: 11.8kg